Are you just wanting to enable auditing on the datamover? If so, I can give you the reference. If you want to get email notification of events such as datamovers failing over, etc. This can be done as well, and I will point you to the reference...Just need to clarify what exactly you want it to do...

To configure the Celerra to send emails when particular events happen, which I think is what you're after, see the "Configuring Celerra Events and Notifications" guide, available through powerlink.emc.com, Resources/Tools, CS Support, Documentation / White paper library, Hardware platforms, then click on Celerra network server on the left hand side, General reference, and scroll down the page until you find it.

It explains the ways of creating email alerts for the various events that occur on the Celerra.

hth,
Kevin.

@AndyC: we also use NetIQ to monitor our Celerras and CDLs. Did you create your own jobs, use SNMP traps or something else? If you like to exchange experiences please contact me under "andreas.roettges [at] ikb-data.de"