UNSOLVED

ronst

updated

15 years ago

R

ronst

1 Rookie

•

51 Posts

•

15 Points

1

5837

December 1st, 2011 01:00

Specs of PW40U60-IEC3V "Quad Power Cord IEC309".

Hello I am looking for the Specs of the following Power Cord:

PW40U60-IEC3V "Quad Power Cord IEC309".


Which connector does it have (16a/32A) and how many (4?)


Regards
Ron
  • ronst

    1 Rookie

    •

    51 Posts

    •

    15 Points

    715

    0

    Posted December 1st, 2011 03:00

    Thank you very much

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    715

    0

    Posted December 1st, 2011 03:00

    IEC309.jpg

    Hi Ron,

    I can only find 

    PW40U60-IEC3SCab Quad Power Cord IEC309

    its four power cords (2x15ft + 2x21ft)  for an EMC 40U rack with IEC309 connector

    we are using the IEC 60309 332P6W which is for up to 250V 32A

    see http://en.wikipedia.org/wiki/IEC_60309

    Rainer

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    715

    0

    Posted December 1st, 2011 04:00

    You're welcome

    Rainer

  • ronst

    1 Rookie

    •

    51 Posts

    •

    15 Points

    715

    0

    Posted December 1st, 2011 06:00

    Rainer,

    Sorry to bother you again.

    I just noticed that the VNX5300 has the following power cord:

    PW40U60-IEC3S Cab Quad Power Cord IEC309

    What is the difference between this and the other one ?


    Regards

    Ron

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    715

    0

    Posted December 1st, 2011 06:00

    I have no record of the part number with the trailing V – our config guides have PW40U60-IEC3S for all VNX models

    There are only 4 different 40u EMC cabinet power cords available:

    NEMA for the USJapan or Russellstoll for USJapan or Clipsal for Australia and IEC for International

    The *V may be a typo or may denote a different ordering type – I don’t know

    Please work with your local CE or partner technician on power specs

    Rainer

  • ronst

    1 Rookie

    •

    51 Posts

    •

    15 Points

    715

    0

    Posted December 1st, 2011 07:00

    In the VNX configuration Spread sheet, the S version is for the 5100 and 5300 and the V version is for the 5500, 5700 and 7500.

    Channel Express also configures it this way when you configure a EMC supplied Rack.

    So I think that the S version has got 16Amp plugs and the V version has 32 Amp plugs.

    I have also send it to the TSSO and waiting for a reply.

    I'll keep you posted.

  • Jim_Hegner

    2 Intern

    •

    212 Posts

    715

    0

    Posted December 1st, 2011 07:00

    Hi..

    Part Number PW40U60-IEC3V is what you can find in the Spare parts store in CXP, and the only one that is marked IEC.

    The PW40U60-IEC3S, is the one that the configurator adds in CXP for a VNX 5300 in a EMC Rack.

    I'm also looking for confimation that those two numbers actually covers the same Cable...

    I have tried our local EMC TC's with no luck,  and have the EMEA TSSO office investigating this....

    If i get an usefull answer, from someone with EMC I'll post it here

    Jim

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    715

    0

    Posted December 1st, 2011 07:00

    Hi Jim,

    Thanks – that explains it – I don’t usually deal with spare parts ☺

    Then they should be the same

    Rainer

  • Jim_Hegner

    2 Intern

    •

    212 Posts

    715

    0

    Posted December 5th, 2011 00:00

    Hi

    This is the Answer from the EMEA TSSO

    Refering to pre-sales support both part numbers (PW40U60-IEC3S ) & (PW40U60-IEC3V ) are the same and they have exactly the same items so you can use one or the other.