I noticed that my VNX5300 had read cache disabled and went to enable it and size it versus write cache. The recommendation from EMC per the emc267304 document (thanks dynamox) is to use 10% of the total for read cache. It states that the VNX5300 has 3997MB, so they recommend 400MB. Per this screen on my VNX, I can see I have much less, 2553MB to be exact:
So I understand that diffent features/enablers may consume some of the 3997MB original memory, even if they are not in use. How can I find out which ones do that, and how much they are consuming? Because I have plenty of features that could be disabled (is that even possible??) that I am not using I believe. That would give more memory to cache which is more important to me than some enablers that are basically unused right now.
Here are the enablers/features I have:
I could do without several of these, like ThinProvisioning (letting VMware do that for me), Compression, and MirrorView at least, IF it will give me back memory to cache.
Below I have provided the breakdown of memory usage. The FAST suite is the only option that will take away available memory from cache and the amount used differs by system. Note that data services is thin provisioning (pools) and tiering – you don’t get one without the other.
If you are not using pools, memory can be freed up by uninstalling the enabler (reboot required) – that would give back about 1215MB to cache. Also note that if you have FAST Cache configured, that is using approximately 1.6MB per GB. Other enablers do not impact usable cache.
MODEL
VNX5100
VNX5300
VNX5500
VNX5700
VNX7500
GB RAM per SP
4
8
12
18
24
Max W. Cache MB
801
3997
6988
10906
14250
Max W. Cache with Data Services*
501
2782
5388
7881
10600
Max W. Cache with Max FAST Cache, No Data Services
571
3129
5324
8446
10830
Max W. Cache with Max FAST Cache & Data Services
N/A
1914
3724
5421
7180
*Data Services are FAST VP, Thin & Compression enablers; VNX 5100 has Thin option only
FAST Cache Usage: ~1.6MB of DRAM per usable GB of FAST Cache.
So, if the recommended READ Cache is 10% of of the Max W. Cache in a VNX5300 which is 3997 (write) how do you set any READ Cache...how can you have one of these arrays and not have READ Cache?
Rainer_EMC
6 Operator
•
8645 Posts
1023
0
Posted December 5th, 2011 11:00
You cant find out directly from the GUI or CLI
You need to remove the Enablers and reboot the SP
Or talk to your local EMC technical contact to find out
IIRC thin provisioning makes the biggest difference
Rainer