UNSOLVED

RichardMwtss

updated

12 years ago

0

28100

April 23rd, 2015 17:00

Dell ML6020 firmware 660G w/LTO6 - commvault encrption

We have a customer with -

Dell ML6020 w/ 3 - LTO6 SAS tape drives firmware E6R0 and 1 LTO4 SAS firmware C7Q2

Library firmware 660G.GS007   Operating system Windows 2012, Commvault Version 10

When a job is sent with Commvault  the ML6020 firmware 660G will not see LTO6 or LTO4 tape SAS tape drives  with Encryption "application managed" .  Screen shot shows Encrpytion field as "none" for all tape drives.

However if library is downgraded to 585G.GS003 the LTO4 tape drive ONLY shows up in screen shot with Encryption "application managed".

Library firmware 585G does not support LTO6 tape drives so cannot use this library firmware nor does current Commvault Matrix compatibility chart show 585G as the library firmware to use.

Commvault Matrix compatibility chart - for entries:  OS:  Windows 2012, Dell Powervault ML6000 Series - Library  firmware shown on chart is 641G.GS103.  

103 - Certified drive FW/driver revisions:  

LTO4: vC7QH, LTO5: vE6Q0

LTO6: vE6R0 Windows driver: Win2k3 v6.2.1.5 (NO LTO6 support on WIN2k3): Win2k8 & WIN2012 v6.2.4.7 (Install IBM driver using "exclusive" install script).

 Questions based on above:

1) Why would Commvautl show a library firmware of 641G.GS103 and LTO6 firmware E6R0, which when applied to ML6020 library - the encyption does not show as application-managed.

2) What is meant by for LTO 6 install IBM driver using “exclusive” install script ?   

If anyone has suggestions, greatly appreciated.  Commvault is saying it is a library issue.  

Thank you.

  • DELL-Sam L

    Community Manager

    •

    8150 Posts

    •

    34715 Points

    416

    0

    Posted May 1st, 2015 11:00

    Hello RichardMwtss,

    First off which application managed encryption are you using EKM or AME?  Also how was this system setup before & what changed to make it so that you were not able to see the drives.  Here is a link to Commvualt books online that shows how you should setup the encryption just incase they did not provide this to you.  documentation.commvault.com/.../article

    Please let us know if you have any other questions.

  • 416

    0

    Posted May 1st, 2015 17:00

    Hi Sam,

    Using Application Managed Software - Commvault Version 10

    NO EKM being used.

    Per Dell documentation with Application Managed Software - AME,

    EKM is not required.

    Previous Setup:

    Dell ML6020 w/4 LTO4 SAS tape drives.  Library firmware 585G.GS003  No EKM, using Commvault.

    Library screen shows Library and LTO4 tape drives - Encryption field:  Application Managed

    Data could be backup in encryption mode via Commvault backup commands.

    Setup Now:

    Dell ML6020 w/ 3 - LTO6 SAS tape drives firmware E6R0 and 1 LTO4 SAS firmware C7Q2

    Library firmware 660G.GS007   Operating system Windows 2012, Commvault Version 10

    Library screen shows both Library and LTO4 tape drives - Encryption field:  NONE

    From the Web Client - Setup - Encryption - Partition - Configuration - at this point it stops with error message EKM is required.

    How do you change the Libary & Tape drive- Encryption default from NONE to Application Managed ?

    Yes we can see the tape drives - that is not the problem,

    Prior to your response - we have gone over available Commvault documentation including link set by you.   - documentation.commvault.com/.../article

    Commvault error:

    error logs that encryption is not turned on at the hardware level.

    10224 1094  04/07 09:01:52 ###### CvException::init(): func_name=UXScsi::send, file_name=UXScsi_win.cpp, message='UNKNOWN SCSI command to scsidev@Scsi5:0.41.0 failed with error=The request could not be performed because of an I/O device error.

    This tells me Commvault did an api call to the operating system and the scsi command was sent to the drive and returned as unknown.