UNSOLVED

Chuck93256

updated

4 years ago

C

Chuck93256

2 Intern

•

16 Posts

0

1403

September 14th, 2022 03:00

Dell Optiplex 790 MT processor

Dell Optiplex 790 MT stock condition. I've read that my tower does not support the 2600k 3.6 chip, but will will run a 2600 chip?? I know we talked about it in my last post but I wanted a clean post lol. My problem is I bought the i7 2600k chip, updated my bios and tried to install 2600k chip and my pc did turn on and acted like it was booting up but I had no video. Then it just sat there idleing. Will my stock 790 MT run the i7 2600 chip?

  • Chino de Oro

    11 Legend

    •

    8554 Posts

    •

    47161 Points

    338

    0

    Posted September 14th, 2022 04:00

    There are plenty of Optiplex 790 with both i7-2600 and i7-2600k on Userbenchmark.  You may want to do a reset if haven't done so.

  • speedstep

    11 Legend

    •

    46969 Posts

    329

    0

    Posted September 14th, 2022 05:00

    @Chuck93256 

    2600 or 2600K should not be an issue as long as you.....

    Updated BIOS to current BEFORE changing CPU

    And you have a TOWER , Desktop, SFF model. USFF isnt going to support 65W to 95W cpu.

    Last resort would be to get a unit with that already installed.

    Dell-OptiPlex-790-SFF-Desktop/dp/B01HTTGI64

    Try disconnecting all storage and turn on to post HDD not found error. The cpu may be fine but windows is not. Black Screen of death is very common now.

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    327

    0

    Posted September 14th, 2022 06:00

    I do not think you need to update bios to run either i7-2600 or i7-2600k.  i7-2600 and i7-2600k have the same cpuid as far as bios is concerned.  CPUID signature: 206A7.

    i7-2600 is supported on 790 from the get go when the model was released.


    Can you put your old cpu back to see if the PC can still POST?

    many possibilities why motherboard cannot post or apparently not able to.  First thing to double check is video cable connection and monitor function.

  • Chuck93256

    2 Intern

    •

    16 Posts

    321

    0

    Posted September 14th, 2022 07:00

    I forgot to mention the motherboard is a used replacement from a doner 790 

    Also when I tried last time my windows 10 was not activated so I put back the factory CPU and activated it but haven't tried sense. Could that be why?

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    311

    0

    Posted September 14th, 2022 15:00

    No.  When changing CPU's or any other hardware, Win10 will "detect new hardware" and ask for restart.  May be the i7-2600k is defective.

     

  • Chuck93256

    2 Intern

    •

    16 Posts

    306

    0

    Posted September 15th, 2022 05:00

    I am gong to try another chip. Thanks.