I have a Dimension 4500 (WinXPpro) connected to a TrueMobile 2300 Router with an Inspiron 1100 with a TrueMobile 1300 PCI Card (not the internal). Problem is the Inspiron can only stay connected to the 2300 for about 3-5 minutes at a time. It then re-connects. It's very aggravating.
I've tried every channel (1-13) on the router and performance is the same. This exact problem can be occurs when the Inspiron is sitting on the same desktop within 6 inches of the TrueMobile 2300 Router!
Anyone got any suggestions?
P.S. It did it three times during the writing of this Post - 15 feet away with unobstructed line of sight!
I think I've fixed it. Already checked firmware and driver versions. Both are the latest.
I'm going on 45 minutes now without it disconnecting.
Here's what I did:
Right Click "Wireless Network Connection" in Network Connections. Click "Properties" Click "Wireless Networks" Click "Properties" under the "Preferred networks" heading. Click the "Authentication" tab. Unselected "Enable IEEE 802.1x authentication for this network"
Then Click "OK" all the way out.
I'm sure that was the default setting. Maybe not. Anyway, seems to be working just fine now.
So many posts covering this problem - 2300 firmware update and the latest driver for the 1300. Downloads tab above. Many posts are on the Inspiron - Network forum.
I just got a new Truemobile 2300 three days ago and have had a a continuing issue with disconnects. On the other end I have an I8200 with a Truemobile 1300 mini-PCI card. I have the latest drivers and firmware.
I saw the procedure you recommend in the help files, but I cannot follow them unless the router's (and network card's) security is turned off (no WEP, no WPA). Otherwise, the "Enable IEEE 802.1x authentication for this network" option is selected and disabled. I guess this is intentional.
I think I've fixed it. Already checked firmware and driver versions. Both are the latest.
I'm going on 45 minutes now without it disconnecting.
Here's what I did:
Right Click "Wireless Network Connection" in Network Connections. Click "Properties" Click "Wireless Networks" Click "Properties" under the "Preferred networks" heading. Click the "Authentication" tab. Unselected "Enable IEEE 802.1x authentication for this network"
Then Click "OK" all the way out.
I'm sure that was the default setting. Maybe not. Anyway, seems to be working just fine now.
Try this. Change the channel of your 2300 router to 11. For that, Open Internet Explorer (preferrably from a computer thats wired to router) , type in 192.168.2.1 ,enter , type in user name and password both as 'admin' . That will give you the router settings page. Open 'basic settings' , click on 'next' ,there you change the channel to 11. Click on 'save and apply' and then on 'save & restart ' button .
Thanks for your suggestion. Unfortunately, it is not the solution.
I think the issue is with range and/or interference. My plan is to 1) buy a long, flexible Ethernet cable, 2) plug the router into the cable modem with that, 3) place the router on a little red wagon, and 4) pull the router around with me whereever I go with my laptop. I am sure this will work.
Try this. Change the channel of your 2300 router to 11. For that, Open Internet Explorer (preferrably from a computer thats wired to router) , type in 192.168.2.1 ,enter , type in user name and password both as 'admin' . That will give you the router settings page. Open 'basic settings' , click on 'next' ,there you change the channel to 11. Click on 'save and apply' and then on 'save & restart ' button .
I'm having the same problem and the following is what a Dell Tech had me do.
Restart computer
Press F8 when the DELL screen appears (this takes you to an operations screen of some sort)
Select 'Safe Mode' and hit enter
Select your operating system and hit enter
Close out of these screens
When the computer reboots it is now in safe mode and all the icons are huge!
Click on Start, Control Panel, System (computer icon with a red check mark)
Click on the Hardware tab
Click on Device Manager
Click on Network adapters
Now here is where I feel uneasy--the tech said to uninstall all the adapters listed (mine has about 10 listed) Not all will let you uninstall but I was told to try them all.
Close out of all the screens and restart the computer. It will restart in normal mode and all the icons are at regular size. Now see if your connection is available. That's it....
I've had to do this several times and my wireless connection is now on it's 4th connection change (went from wireless to wireless 1, 2, 3.....) and I assume that it will continue to count up endlessly!
I'd like to know if there is something else I can do besides this whole routine. I see that someone said there are other messages/suggestions so I am off to do some reading/research.
I had the same problem and I fixed it -as vinueappen suggested, thanks!- changing from channel 6 (default) to channel 11 on the router settings page (my.router or 192.168.2.1 on Internet browser address).
My wireless connection happened to disconnect every 5-10minutes or so, even with the computer at 12 feet from the router and when the signal strength was always rated as "excellent". It has been stable after that change (tested over 5-7hours of use).
Hope it works for you, I know how annoying this can be.
richi
Inspiron 5100 with truemobile1300 PCI card, WinXP home edition, Truemobile 2300 Router.
@LeftSpin wrote:
Did you get a fix for this problem? I'm having the same symptoms as HighStress
My issues appear to be two-fold:
1. Someone else in this neighborhood has a wireless router, and my computer will sometimes pick up it's signal. When this happens, Windows wants me to choose between them, even though I have removed the other router from my preferred list. In some cases, at least, this interference by the other router seems to disconnect my established connection.
2. When I move the computer throughout the house, the signal gets weaker, and then sometimes stronger again, etc. When it is weak enough, the connection ends. I don't think I can solve this until I can run some Cat 5 cable through the wall so that the router can be more centrally placed. Still, my house is not very large, so I am surprised that distance is an issue.
I have one other issue that I did not mention in my original post. It takes a LONG time for the network card and the router to establish a connection when I boot my computer. I usually have to wait a few minutes before logging in or Windows simply freezes until these two devices find each other and work out their little arrangements. I am using this router as an access point, with its DHCP features turned off in favor of my Netgear RP114 Web Safe router. The Netgear feeds IP configuration information to the TM2300 as well as all of the computers on my network.
I don't expect the last issue (about the connection time) to ever really be resolved. But if someone knows a way to do so, I would appreciate finding out.
I have the same situation with the pop up of choosing from available networks. And what's weird is that sometimes my network isn't even listed. Last night my connection was fine. Then I tried to access the internet this morning, I had no connection. So I went thru all the steps I mentioned before in a post earlier in this thread about uninstalling network adapters and to no avail---still no connection.
After an hour and an half on the phone with Dell wireless support , I got connection back by resetting the router and not enabling encryption. Instead, Sharon, the tech, had me go into the router settings under advanced settings and then advanced wireless and check the box next to HIDE MY WIRELESS NETWORK.
She said that there are problems with staying connected when encryption is enabled. If the wireless connection is hidden, Sharon says that other people will not be able to see it under their available networks and therefore cannot connect using your internet.
I'd still feel better if I had the encryption enabled. Does anyone know more about this HIDE wireless connection option?
inspiron1100
22 Posts
986
0
Posted November 3rd, 2003 03:00
I think I've fixed it. Already checked firmware and driver versions. Both are the latest.
I'm going on 45 minutes now without it disconnecting.
Here's what I did:
Right Click "Wireless Network Connection" in Network Connections. Click "Properties" Click "Wireless Networks" Click "Properties" under the "Preferred networks" heading. Click the "Authentication" tab. Unselected "Enable IEEE 802.1x authentication for this network"
Then Click "OK" all the way out.
I'm sure that was the default setting. Maybe not. Anyway, seems to be working just fine now.
Thanks for looking at my post.