
UNSOLVED
M
Mike_Neighbour
1 Rookie
•
1 Message
•
2 Points
0
176
January 20th, 2026 06:51
Old firmware required to allow upgrade of Force10 MXL Blade switch to latest version
Hi everyone,
I am hoping someone here can point me in the right direction.
I have six Force10 MXL blade switches in a Dell PowerEdge M1000e chassis. They are currently running FTOS firmware version 8.3.16.2, and I would like to upgrade them to the latest available release (9.14.1.8).
According to the Dell release notes OSS9.14.1.16_M_IOA_Release_Notes.pdf , the upgrade path requires first moving to firmware version 8.3.17.3 before jumping to the 9.x train. Unfortunately, all FTOS 8.x firmware versions seem to have been removed from the Dell download site, which leaves me stuck on the current version.
Is there any way to obtain firmware 8.3.17.3 purely to allow this upgrade path to the latest version?
Alternatively, if anyone has found another method to work around the 32 GB TFTP download limitation fixed by the 8.3.17.2 release, I would be very interested to hear how you handled it.
Thanks very much for any advice or suggestions.
Mike
Responses (1)
Solutions (0)

DELL-Marco B
Moderator
•
3980 Posts
0
0
Posted January 20th, 2026 21:11
Hello Mike,
Hi Mike,
I’ve looked into this and what you’re seeing is expected behavior. The FTOS 8.3.17.3 firmware is still available, but all 8.x releases have been removed from the public Dell download site because the Force10 MXL platform is out of software maintenance. However, Dell does retain these intermediate versions in its internal archives specifically to support required upgrade paths.
The step to 8.3.17.x is mandatory, as it includes bootloader updates and fixes the image size limitation that otherwise prevents a successful upgrade to the 9.x train. Because of this, a direct upgrade from 8.3.16.2 to 9.x isn’t supported, and there isn’t an alternative workaround for the TFTP limitation using older firmware.
The recommended approach is to open a case with Dell Technical Support and request FTOS 8.3.17.3 as the intermediate upgrade version. Support will be able to provide the official image and guidance so you can proceed to 9.14.1.x in a supported and safe way.
DELL- Marco B
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!