UNSOLVED
P
praveenraiker
1 Message
0
4687
August 23rd, 2011 22:00
ACL limitation issue on dell 6248
Hi,
I have upgraded dell 648 firmware with new 3.3.1.10 (release Aug 2011). i have created more then 20 VLAN and each vlan has his separate VLAN ACL. each ACL has 40-50 ACE entries. issue is when i am trying to apply ACL on VLAN interfaces, its applied and working with 5-6 VLAN after that giving error "Error processing ACL".
Any idea.
Thanks
Praveen
From what I have discovered the supported limit is 100 ACLs with a total of 127 ACE entries. The 7200 has a far greater limit. ( form Dell marketing team "Up to 100 Access Control Lists (ACLs) supported; up to 127 Access Control Entries (ACEs) per ACL or per port".) However they fail to mention the fact that this is an aggregate limit across all interfaces on the 6200 series devices. Not including QoS mapping. A little miss leading IMHO.
Schmous
Schmous
9 Posts
228
0
Posted April 5th, 2012 12:00
Praveen
The issue is there is a limitation on the 6200 series switches. They have not only a limit on the number of ACE =. I think it is 127. Which looks about right by what you are saying. The 7200 series does not have that hard limit.
Hope this helps.
Schmous.