UNSOLVED

Graeme Watt

updated

14 years ago

GW

Graeme Watt

1 Message

0

9441

September 6th, 2011 09:00

3008WFP death

My 3008WFP died on me a couple of days ago - one second it was working, the next completely dead. Rather conveniently it was two months out of warranty. Dell support indicated that this is not a serviceable item and that my only option would be to replace it. I've duly replaced with a U3011 but it seems a real shame to just throw the 3008 into the skip - are there really no options for repairing high end monitors like this (that don't cost more than a new one)?? It probably only needs a new PSU or something...

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    1099

    0

    Posted September 9th, 2011 22:00

    They were correct. Dell does not repair monitors or sell internal monitor components. We do not even have monitor repair/disassembly documentation. We simply replace them while under warranty. I only know of a USA repair site. I do not have any UK monitor repair sites.


    DELL-Chris M (old account)

    #IWork4Dell

  • 1099

    0

    Posted September 21st, 2011 09:00

    Mine died last night too.  It won't register any indication that it's plugged in.  It has to be something to do with the PSU or switch.  Everything else about it was working perfectly.  I hate to take on the expense of replacing the whole thing when it's likely a small repair bill to get it working again.

  • 1099

    0

    Posted November 24th, 2011 07:00

    If the power button light does not light then it maybe the power board.

    Mine would not do anything at all and , of course, was out of warranty.

    I could not find any local repair shops that would touch it so I sent it to the seller on ebay that does the 3007wfp and it is alive again.!!

    The power board on mine was the blame.

  • grprfan1

    1 Message

    1099

    0

    Posted December 13th, 2011 11:00

    Hi Chris, We've received the unmovable blue box in the top right of our 2405FPW 24" monitor that says "no input signal."  We have 2 monitors connected (and it has worked perfectly in the past). However, our picture is perfect. Any idea how to get rid of it?  We've done all the usual. Turning it off, replacing the DVI cable, switching the outputs on the video card. We ran the standard self test feature removing both DVI cables, switching the monitors off and on again. The 2nd monitor still puts up the blue box. The first monitor shows it's OK.  The problem monitor puts up a square box with four color bars (white, red, green and blue). As I said, our display picture is perfect. Any ideas on how to remove the blue box?

  • Curamrda

    9 Posts

    1099

    0

    Posted June 27th, 2012 15:00

    how does the power board look like? and where can i get it? thanks

  • 1099

    0

    Posted June 27th, 2012 15:00

    Not sure where you are located for shipping, But you can get one on ebay.

    These dells are pretty hard to take apart, These kind of come apart like the 3007wfp but the front trim is really hard to do.

    youtube has a video for the 3007wfp disassembly,.

    Not sure if there is a video for the 3008 ??