
UNSOLVED
Closed
XPS M1530 battery "stand"
Just received my new M1530 with a Cell battery. I don't like to have the laptop battery in when connected to the outlet. When I took the battery out, I discovered that it also acts as a "stand" propping up the back end of the laptop. The laptop is also not fixed on a flat surface without the battery. Is this true of all M1530 models or just the 9 cell battery? Thanks.
Responses (8)
Solutions (0)
Raised effect can be described like this: THE 9-CELL battery feet are I guess slightly taller than 6-cell feet. I mean the rubber feet on the back side. So, in general the laptop is more inclined with 9-cell batteries than 6-cell ones. People claim they can use the keyboard better with more incline. Also, there is supposedly a little more distance between the bottom case of the laptop and the surface on which it stands. This might lead to a better air circulation and enhance cooling of laptop.
However, 9-cell battery is bigger and protrudes from the back. So, I didn't order it with that.
Oz.
Kafkar has it right on the money. With the 9 cell, the back side of the M1530 is raised off the surface about a half inch. I do like the angle and appreciate the better cooling that comes with the bottom and the fan being raised off my desk. However I never like to operate the laptop with the electric plug AND battery connected - I always take the battery out (with my old Inspiron 9400/E1705 that was not an issue). I cannot take the 9 cellout because the laptop wobbles without it.
I guess the same it true with the 6 cell, the battery must be connected for the laptop not to wobble. Is this true?
neil_kiser
15 Posts
360
0
Posted February 28th, 2008 21:00
I can say that on one of my 1330s, which has a 6-cell bttery, that if I were to take the battery out, it would not sit correctly. From what I can see of teh bottom of my 1530, that would be true as well (although, like you, I have a 9-cell on my 1530).

Pawk
319 Posts
360
0
Posted February 27th, 2008 15:00