
UNSOLVED
Closed
A
AceDiamond
1 Rookie
•
4 Posts
0
6418
July 28th, 2008 20:00
Inoperable Microphone Jack
Hello all. I own an Inspiron 600m that I've had for about 3 years now. About 18 months ago the microphone jack stopped working, which I attributed to the fact that my computer had been in close proximity to a lightninig strike while plugged in, and since that had taken out the internal modem I believed it probably crippled other parts of the system as well. However about 2 months ago it began working just fine again, only to break down again recently. I've tried using multiple different microphones in the jack but nothing seemed to work, only providing heavily distorted buzzing if it picked up anything at all. My question is does anyone have an idea why it broke, worked, and then broke again, and what, if anything, can be done to fix it?
Responses (4)
Solutions (0)
AceDiamond
1 Rookie
•
4 Posts
413
0
Posted July 28th, 2008 21:00
That seems to be a bit different from my problem, plus it's for the 700m so I'm not sure it's interchangable anyway. Like I said the flaw here is that the mic jack simply does not work anymore. It doesn't pick up any recording noise during calibration, and any that it does pick up is just interpreted as a short, loud spike of feedback.Jim Coates
6 Operator
•
13582 Posts
413
0
Posted July 29th, 2008 01:00
Oops, my mistake. Wasn't thinking (enough).
Jim
I had a strange problem with my right channel audio output and no microphone. This happened all of a sudden, thought it was headset/mic but it wasn't. Just for giggles I reloaded the SigmaTel drivers and the right channel audio came back and the microphone sort of works except I get a loud hum and noise in the background when recording.
This seems to be an issue with the 700m's from long ago, now 4 years later after changing the drivers I have it.....
Will start looking for new drivers somewhere else, not from the Dell driver page.
will report back if I get a fix.
Ron

Jim Coates
6 Operator
•
13582 Posts
413
0
Posted July 28th, 2008 20:00
700m mic jack flaw thread
Jim