Same thing happening here.

I have a 700M and I do not see anyway to enable TV-OUT.

On the 700M user guide, page 36,  it shows "Notebook, TV and other Devices" on the Intel Graphics Controller Properties Device Tag.  But mine only shows "Notebook", can't figure out how to select TV-OUT option.

Tried different kinds of graphic drivers, still no luck.

I am going to contact dell, but my service tag is still not valid yet.

If anyone know how to enable this TV-out feature, please reply.

Thanks so much.

I tried both of the bios (only 2 available by now).

I connect composite to the TV (sorry, I dont know what the tv model is), I might try my sony one later.

Ok, if you have a 700M, when you do not attach the s-video cable, is the TV output option available on my display device tag??  Or you must connect the cable first, then the option is available to select??

 

Please advise.

Thanks a lot for replying.

I don't believe that there would be any other sw to install to make this work.  And, I don't really buy the "it was there before the drive was reformatted".  My concern would be more to the S-Video cable being used.  What BIOS does you have installed on the 700m?  Are you attaching to the S-Video on the Toshiba?  What model Toshiba (out of curiousity)?

So, the 700m User Guide looks to me to specify that the system will only support S-Video to S-Video.  If you hold down the Ctrl+Alt keys and then press F12, you will see the Intel Graphics Controller properties.  If the system is not connected to anything, all you will see is the Notebook on the left hand side.  When you connect to other devices like a TV, projector or monitor, you will see other items appear in the list underneath the Notebook icon.  If other devices are not "seen", nothing will appear in the list.  My suggestion at this point is to find a TV with an S-Video port and see if you can connect S-Video to S-Video as suggested in the User Guide.  This will at least be a good troubleshooting step.

right, it only states TV-out, i never know it does only support s-video to s-video.

Ok, I'll try the svideo to svideo connection.  Hope it will be working fine.

 

So, is anyone using s-video to composite on the 700m? (successfully?? :manmad: )
If so, please reply.

 

Thanks again for all the replies.