
UNSOLVED
XPS 8500 Bios A12 only recognizes 6 of 12 Gb installed
Dear all,
I am new to this forum. I have a dell XPS 8500 with 12 Gb RAM installed. I have Windows 10 running (although not tested by Dell for this model). I did a BIOS upgrade from A9 to A12. My 12 Gb RAM is not recognized, only 6 Gb is being seen, also after Bios reset to default settings. The whole machine is in factory configuration as it was delivered 3 years ago.
Thank you for any suggestion to solve this issue.
BR Pieter
PS: I googled a lot but didn't came across a real solution :-(
Responses (23)
Solutions (0)
Unplug the system, hold the power button for 30 sec and remove and reinstall all the memory modules. See if that clears the problem. If not, try the modules one at a time in each socket until you isolate the bad module (or modules) -- in which case, the memory modue(s) in question will need to be replaced, or the bad socket(s) -- in which case, the mainboard will need to be replaced.
Hello, happy new year! I did exactly what you suggested. All memory modules are fine, also the motherboard is fine. No hardware issues. By swapping around the modules in the sockets I could find different combinations being recognized in BIOS not higher that 8Gb. Combinations of 6 Gb also work and off course only 4 Gb.
It seems that when two 4 Gb modules are installed the other 2 2 Gb don't work in combinations. Very strange... because everything is original Dell configuration. I could send you the list of all combinations I tried. At the moment I run with 8 Gb in the following sockets order 1-4: 2/4/2/4 Gb, as said only 8 Gb being seen. Do you have any other suggestions? Thx. for your support.
Windows 10 (see my initial post). But if BIOS doesn't read more than 8 Gb, how is Windows then of any influence? MS doesn't Support Windows 10 for this model, it is not tested, is the return message when I put the Service tag number in the Dell Support page. But the specs are absolutely Windows 10 capable....?

ejn63
11 Legend
•
87469 Posts
•
321256 Points
2230
0
Posted December 26th, 2016 07:00
Where are you seeing 6 G -- under WIndows or in BIOS setup (f2 at powerup)?
Is this newly added RAM or existing RAM?