UNSOLVED
C
continuem1
17 Posts
0
8640
July 19th, 2004 00:00
Adding memory to dimension 2400
I'm thinking about adding some memory to my 2400,I know you have to know the memory type, the speed and the number of connector pins. In my owners manual under specifications, memory it says, Architecture DDR,SDRAM, and it says Memory Type PC2100(266-MHZ) or PC2700 (333-MHZ) DDR SDRAM (non-ECC). And I don't see nothing about the number of connector pins.
I'm not sure what this means do I have two different types of memory installed here. What would I ask for If I wanted to install another 128 mbytes of memory.
I have a pentium 4 2.2 ghz processor, 40 gig harddrive, 128 mbytes of ram.
Thank you for your help on this.
Beekeeper40
284 Posts
196
0
Posted July 19th, 2004 02:00
Just bought my 2400 this year and jumped it up another 256, planing on putting another 256 in. My owners manual said the same thing so I took the side cover off and on the memory sticker it said PC2700 (333MHZ). The pins is 184. I should have bought the 512 stick, since 64 mgs of memory goes to video.
Dell Dimension 2400
P4 2.6 GHz
384MB DDR SDRAM
40GB Hard Drive
3.5 Floppy
17in. Monitor
Windows XP Home (SP1)
Lexmark 3 in 1 1150
shesagordie
12 Elder
•
46017 Posts
196
0
Posted July 19th, 2004 00:00
contiuem1.
Go to www.crucial.com and use their memory selector, they have excellent RAM, that's guaranteed to work in your system and has a lifetime warranty. The modules are 184 pin DIMM
Bev.