
UNSOLVED
710 H2C cpu temps?
Please post yout H2C cpu temps here, Im interested to see them after reading this on a review site
"we put the H2C system to the test. First we measured the CPU's temperature (while factory overclocked to 3.2GHz) to be about 40C under load when the ambient room temperature was a comfortable 22C. Then we changed into T-shirts and artificially increased the ambient temperature to about 30C with a space heater. We recorded the CPU's temperature to be 44C under load, only a 4 degree increase despite the 8 degree increase in ambient temperature."
However looking in Ntune on my H2C it shows an Idle of 43-47c Idle!!!! and this room is very cool.
Anyone?
----------------------------------------------------------------------------------
IDLE:
Mine CPU 43-47c / SYSTEM 28-32c / GPU 55c
----------------------------------------------------------------------------------
I was hoping for better than this? whats going on the artical says 40 underload, this is my Idle temps.
can you post your idle H2c temps please.
Message Edited by itskrom on 03-23-2007 02:40 PM
"we put the H2C system to the test. First we measured the CPU's temperature (while factory overclocked to 3.2GHz) to be about 40C under load when the ambient room temperature was a comfortable 22C. Then we changed into T-shirts and artificially increased the ambient temperature to about 30C with a space heater. We recorded the CPU's temperature to be 44C under load, only a 4 degree increase despite the 8 degree increase in ambient temperature."
However looking in Ntune on my H2C it shows an Idle of 43-47c Idle!!!! and this room is very cool.
Anyone?
----------------------------------------------------------------------------------
IDLE:
Mine CPU 43-47c / SYSTEM 28-32c / GPU 55c
----------------------------------------------------------------------------------
I was hoping for better than this? whats going on the artical says 40 underload, this is my Idle temps.
can you post your idle H2c temps please.
Message Edited by itskrom on 03-23-2007 02:40 PM
Responses (53)
Solutions (0)
- mmmm
my h2c temps
TAT 58c idle (nightmare)under load 80+
Core Temp: 56c Idle (nightmare)under load 80+
Ntune : 45c Idle underload 60+
this is off the chart, and not a good thing after banging on about the cooler in this pc, this one is getting swapped out in a couple of weeks as it has a fault, we will see what the new ones temps are like. (the fault is nothing to do with cooler)
I know it takes a while (sometimes 200hrs) for the thermal paste to work correctly, sometimes knocking off 5-10c, but still!!! - Folks should also report what tool they are using to measure temps. I posted on the other thread an explanation of TCase vs. Tjunction temps, and what CoreTemp reads is TJunction.Mine idles at 50C and goes up to 80C under 100% load using CoreTemp/Intel TAT.Using NTune, it goes up to 65C under load, idles around 35-40.
UnknownGamer
26 Posts
416
0
Posted March 24th, 2007 00:00
@itskrom wrote:
download and install Ntune
Then restart your computer and press f2 and enter the bios, in there enable overclocking from off to on, then save and exit on re-boot enter ntune and it will also now list the cpu temp data.
Won't that void my warranty though since I would have to enable over clocking?UnknownGamer
26 Posts
416
0
Posted March 24th, 2007 01:00
I just read it and it din't really say much, especially about voiding my warranty.
UnknownGamer wrote:
I just read it and it din't really say much, especially about voiding my warranty.
Then you are good to go! :smileyvery-happy:Even if you enable overclocking, there isn't much you can do to harm your system. Dell has locked down the BIOS and left very few options available. So you can't mess with voltage and such. Besides, if all you are going to do is monitor temperatures with nTune, there is nothing to worry about.
UnknownGamer
26 Posts
416
0
Posted March 24th, 2007 02:00
Out of curiosity, if I change my cpu speed will that void my warranty?
I dont think so. If they enabled the option in BIOS it was because they wanted you to have the option. If you have problems, the first thing they will do is make sure everything is back to stock - they won't support you trying to troubleshoot overclocking problems. And that's the first thing you should do anyway when troubleshooting your PC, even before you call for support.
UnknownGamer wrote:
Out of curiosity, if I change my cpu speed will that void my warranty?

UnknownGamer
26 Posts
416
0
Posted March 23rd, 2007 19:00
Message Edited by UnknownGamer on 03-23-2007 04:24 PM