UNSOLVED

masoodmm

updated

10 years ago

M

masoodmm

1 Rookie

•

6 Posts

0

10982

March 29th, 2017 01:00

does alienware 17 R4 2017 support nvme ssd like Samsung 960 pro?

Hi

does alienware 17 R4 2017 support nvme ssd like Samsung 960 pro?

although  I searched internet for compatible ssd, i didn't find any information about my Laptop-Alienware17. 

i purchased base model with (1Tb hdd -  1070gpu-7700 cpu) from Dell Canada website. 

best regards 

  • speedstep

    11 Legend

    •

    46969 Posts

    9050

    0

    Posted March 29th, 2017 05:00

    Alienware 17 R4 AW17R4 - 17.3" FHD - i7-6700HQ - 8GB GTX 1070 - 16GB - 1TB HDD+128GB SSD.

    http://topics-cdn.dell.com/pdf/alienware-17-laptop_Service%20Manual_en-us.pdf 

    It appears that an 80mm drive fits.

    Not sure about the spec however.

    SSD 80MM

  • Alienware - Rodrigo

    9 Technologist

    •

    4398 Posts

    9050

    0

    Posted March 29th, 2017 10:00

    Hi, 

    According to the specs, it should work, but we have never tested this specific drive on the Alienware 17 R4. Some users confirmed issues with this type of upgrade, the issues are usually related to the system not recognizing the drive. You could try searching on different support forums (like Alienware Arena or Notebook Review) for this info, there may be users that have tried the upgrade and posted their results. 

  • 9050

    3

    Posted September 13th, 2017 23:00

    Yes it definitely does support Samsung 960 PRO.

    I am currently running an Alienware 17 R4 with a Samsung 960 PRO 2TB as my boot drive.

  • Strob

    20 Posts

    9050

    0

    Posted October 27th, 2017 06:00

    Hi,

    I was able to format the drive (samsung 960 pro 512GB M.2) and see it in windows. But the samsung apps (for driver and firmware update) dont' see the drive. Do you happen to know how to make those apps recognize the drive? I want to use the data migration tool to switch my boot drive to it but I wanted to update the driver and firmware before...

  • bca009

    1 Rookie

    •

    1 Message

    9050

    2

    Posted October 27th, 2017 12:00

    turn off raid

  • dbode

    1 Message

    9050

    0

    Posted January 1st, 2018 16:00

     I have a 17 R3 and replaced my 256GB nvme with 960 PRO 1TB and have same problem with Samsung driver program not seeing the new drive. I used Migration to copy them then took the old drive out and installed in slot one for the boot drive. Seemed to work good but starting to have some blue screen failures. The only Bios setting is SATA operation and is set to RAID. Can only switch to AHCI. Should I switch to AHCI?