I replaced the bt/wifi ax211 module with a be201 module, but it does not work in my 5450. I have to force the drivers, but even then it says (in device manager) 'insufficient system resources exist to complete the api'.
I know it uses a newer interfaces (cnvio3), but I assumed this chipset was new enough to support this be201 module. Will a future bios update make it possible to run this be201 in my 5450?
@rodrigonbr no sorry, did not try to install it again. I will report back if it works, since there have been a few bios-updates. And I still feel this card should be supported...
I bought the BE201 without researching compatibility. Your comment made me nervous. Still waiting for delivery, but as soon as it arrives I'll test it and report back. I'm worried, though.
I might just switch to the BE200. My AX211 is giving me trouble. Not sure if it's the hardware, but I'd rather test a new card than sell the whole laptop.
@rodrigonbr my ax211 is working fine, just for your information.
You are on the latest bios (december 16th 2025)? Hope you get it working. The be200 is the alternative indeed, but I am hoping the be201 will work at some point.
I remember that some 5450's had issues with wifi because the antenna came loose, because the cables running from the screen to the mainboard were too short. That might be the culprit...
having trouble with Bluetooth headphones on Teams. Updated all drivers and BIOS, reinstalled Win 11, but nothing fixes it for good. My last hope is switching to a BE201 or BE200. If that fails, I'm getting rid of my 5450.
ejn63
12 Elder
•
31841 Posts
•
156253 Points
0
0
Posted October 4th, 2025 13:48
That system will support CNVio. Did you remove the existing network drivers for the old card before you shut down to do the upgrade?