‎Do we need to destroy the security domain when reinstalling NSG8 NAS Code? | DELL Technologies

Start a discussion

UNSOLVED

condor4

updated

16 years ago

condor4

22 Posts

0

534

January 25th, 2011 04:00

Do we need to destroy the security domain when reinstalling NSG8 NAS Code?

Hello,

We need to reinstall the NAS Code of NSG8 connected to a CX4-960 (Fabric Connexion)

We have cleared all Storage Groups, LUNs and RAID GROUPs on CX4-960.

Do we need to destory the scurity domain on CX?

Do we need also to create a particular user on the CX?

Do you have some other suggestions that might help

Thanks

C
chrisv2
18 Posts
173
0
Posted February 1st, 2011 14:00
Hello,

You didn't mention which Nas code you were running. If it is Nas 6.0 and you are a member of a Unisphere domain I would think it would be best to unjoin the domain (see emc primus emc247813) prior to reinstalling the code but it looks as if you've already done most of the work to undo things. When the installation is completed the nas_checkup command will tell you if everything is working properly since the Clariion backend should retain the current security information.Other than this the only thing I can suggest is if you experience problems contact our EMC support center or your local EMC service rep for assistance since EMC is responsible for installing Celerra Gateway model products .

Good Luck