UNSOLVED
Aurora R10, 5800x ACC manual overclocking
Hi this is new to me but is anyone with one of the new 5000 series R10 able to operate the manual over locking settings.
My one appears to be present but not functional
When I alter the frequencies and voltages the bars all stay red and will fail any tests.
Was trying to bring the voltages down slightly to help with CPU temps
Any advice would be appreciated
Regards
Refards
1014
0
Posted February 12th, 2021 14:00
Sry about the unrelated question. So you get your new R10 with 5800X? Would you mind share your BIOS version? Thanks in advance.
1007
1
Posted February 12th, 2021 14:00
Hi it has the 2.1.0 bios installed
983
0
Posted February 13th, 2021 13:00
Thanks, it's interesting, that previous R10 is not compatible with zen3 even has the 2.1.0 BIOS....
Would you mind sharing a little bit more details from CPU-Z BIOS?
974
0
Posted February 13th, 2021 15:00
I have an R11, so not sure if this will help. I do not use AWCC to overclock my rig. I changed the profiles in the BIOS to overclock my i9 - 10900K CPU and memory (BIOS: Performance).
Task Manager 'Performance' shows steady 5.0-5.2 GHz on my base speed 3.70 GHz CPU and 3200 MHz speed on my 64 GB 3200 MHz HyperX Fury modules. AWCC - Overclock: Off and Thermal: Balanced. No increase or noise on fan speed.
I hope this works for you.
963
0
Posted February 14th, 2021 01:00
Hi, I have the same question regarding the Ryzen 5000 upgrade, after long discussion with support this was the answer i had :
"Regarding Ryzen 5000, Dell will recommend to upgrade only the components that are tested before releasing the specific system model and we will not recommend to upgrade any other components. "
But I have no idea if they actually tested them
Ironyyyyy
27 Posts
1040
0
Posted February 11th, 2021 16:00
If you wanna manual overclocking should use Ryzen master, otherswise there is no options to do on ACC.
@diggs1984