The nas_server -ConvertI18N option for a Virtual Data Mover (VDM) does not trigger Unicode conversion for a file system mounted on the VDM. You must convert file and directory names by using the uc_config -convert option as described in Converting user files and directories to Unicode on page 30.
参考: Configuring NFS on VNX Page29 Verify or Enable Unicode Procedure 1. To verify if your system has Unicode enabled, use this command syntax to list the internationalization (I18N) mode: $ server_cifs |head where: = name of the Data Mover.
ayas
Community Manager
•
7537 投稿
•
68231 ポイント
0
0
投稿済み 2026年3月13日 01:00
hata21 さん
(1)文字コードの設定範囲について(文字コードはファイルシステムごと?datamoverごと?VDMごと?に設定されるものか)
→DM毎です(VDMでも物理DMの設定に依存します)
参考:
Configuring NFS on VNX
Page29
Verify or Enable Unicode
You can enable Unicode for one or more Data Movers by using the command $ /nas/sbin/uc_config -on -mover .
Using International Character Sets on VNX® for File P/N 300-015-112 Rev 01
Page 8
(VDMで文字コードの設定を変えたい場合は直接設定ファイルでの変更が必要)
The nas_server -ConvertI18N option for a Virtual Data Mover (VDM) does not trigger Unicode conversion for a file system mounted on the VDM. You must convert file and directory names by using the uc_config -convert option as described in Converting user files and directories to Unicode on page 30.
(2)文字コードの設定確認方法について
→$ server_cifs |head コマンドで確認が可能です。
I18N mode = UNICODE とあれば、当該データムーバーは Unicode(UTF 8)であることがわかります。
参考:
Configuring NFS on VNX
Page29
Verify or Enable Unicode
Procedure 1. To verify if your system has Unicode enabled, use this command syntax to list the internationalization (I18N) mode:
$ server_cifs |head
where: = name of the Data Mover.
(編集済み)