UNSOLVED
X
xenblogger
2 Posts
0
14024
June 24th, 2015 06:00
--Pending Fix-- T10 XenApp Seamless=yes application display problems
--Pending Fix-- T10 XenApp Seamless=yes application display problems
Opening applications in Seamless mode cause display problems, black screen. Non seamless mode works fine, tested with multiple applications, and a seconds XenApp farm.
Tested with minimal wnos.ini config file.
PnliteServer=xxx.xxx.xxx/.../config.xml ReconnectAtLogon=2 ReconnectFromButton=2
SysMode=classic
Seamless=yes
Screenshot
https://www.box.com/s/xszbem58e66n00o1w25j
764
0
Posted June 25th, 2015 08:00
Thank you for your feedback.
Could you please advise on some additional environmental details? From your screenshot, I can tell you have a few published applications.
-Are you able to see this same issue with all applications you are testing? This looks to be notepad that you were testing with?
-How many applications is your user entitled to?
-What version of XA are you using? (Any HF or Roll-up packs installed?)
Thanks
John764
0
Posted July 22nd, 2015 09:00
Originally Posted by xenblogger
- Screen problems happens with all published applications
- My test user is entitles to 20 applications
- My environment is XenApp 6.5 rollup 1
- I have seamless flags disabled http://support.citrix.com/article/CTX101644 value=3EFFB6per dev, this issue will be fixed on the next build
xenblogger
2 Posts
764
0
Posted June 25th, 2015 08:00
- Screen problems happens with all published applications
- My test user is entitles to 20 applications
- My environment is XenApp 6.5 rollup 1
- I have seamless flags disabled http://support.citrix.com/article/CTX101644 value=3EFFB6