UNSOLVED
VxRail appliance manager / 5480
Hi,
I cannot open link https://vxrail_manager IP:5480. I get error :"This site can't be reached". Telnet IP_address 5480 cannot establish session.
https://vxrail_manager IP/extension/auth.html is working.
VxRail version is 4.5.215
Tnx
1798
0
Posted February 4th, 2021 11:00
I checked logs of vxrail manager and did not find time error. I checked time on vcenter, PSC and vxrail and time is equal. It is strange that the telnet does not pass through port 5480. Is it OK?
1794
0
Posted February 4th, 2021 12:00
I am trying to check if port 5480 is open as it is on vcenter.
1795
0
Posted February 4th, 2021 12:00
Hello AlKo1,
What are you trying to do via telnet? Telnet is supported on a vxrail system.
1767
0
Posted February 5th, 2021 00:00
I found this in localhost_access_log:
"GET /rest/vxm/v1/system HTTP/1.1" 404 1053
1751
0
Posted February 5th, 2021 05:00
As far as I recall, that port isn't open. What task are you trying to run?
1620
0
Posted February 24th, 2021 01:00
Hello AlKo1, All.
You may want to try the following command to see if it open or not:
1594
0
Posted March 2nd, 2021 00:00
VxRail Manager never uses that port in any version. 5480 is the port used by VC or PSC for VAMI. See https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.vcsa.doc/GUID-9831B635-DFFA-40FA-9DA9-CEF8A1729E54.html
Cheers
TGOG
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
1803
0
Posted February 4th, 2021 10:00
Hello AlKo1
Here is a link that maybe of assistance.
https://dell.to/2LkCfob