Hi,

 

Thanks for your question.

 

You can change the management ip https://www.dell.com/support/kbdoc/en-us/000022616/dell-emc-unity-need-to-be-able-to-change-the-management-ip-and-gateway-user-correctable and https://www.dell.com/support/kbdoc/en-us/000184852/powerstore-how-to-change-powerstore-x-model-ip-addresses

 

For storage Steps for unity

Under Storage, select File> NAS Servers

 

 

Select the relevant NAS server, and then select the Edit icon.

On the General tab: Change the NAS server name.

 

Select SP Owner to transition from one SP to the other SP for this NAS server. For example, you may want to do this if you have an overloaded SP, and want to reduce the load by moving the server to the other SP.

 

On the Network tab:

 

Select the

Interfaces & Routes

sub-tab to add, change, delete, or verify NAS server interfaces, enable or disable IP

packet reflect for the NAS server, or change the NAS server's preferred interfaces. Select an interface, and then select

Show external routes for interfaces

to access the per-interface routing table, where you can add, change, or delete

the selected interface's routes for responding to client requests.

 

Select the Routes to External Services sub-tab to add, change, or verify NAS server routes for external service requests, or to configure default gateways

 

Storage for powerstore https://dl.dell.com/topicspdf/pwrstrt-ntwkg_en-us.pdf?dgc=SM&cid=268781&lid=spr4844651529&linkId=119200713

 

 

Let us know if you have any additional questions.