Solved!
Go to SolutionThird party pcie nvme on Precison 7820
Hello
I've red several post about nvme on Precision 7820 but i didn't found my information.
I have installed Intel SSD 750 Series in my pc.
I can install win 10 in Legacy mode .
In UEFI mode, disk is not is not seen : i'm asked to load driver.
Is there something to set on bios ?
Thanks
0
0
Posted October 2nd, 2024 12:08
0
0
Posted October 2nd, 2024 23:26
Reload the driver twice may make it sticks.
0
0
Posted October 3rd, 2024 07:40
0
0
Posted October 9th, 2024 11:49
Hello
I've tried several time to load the driver : no disk is found by win 10.
When I set to Legacy, nvme is displayed on bios:
If i choose UEFI, no disk is displayed.
Can somebody know why ?
I decided ton continue win 10 installation and load driver :
After a while, computer hang : bsod
Am i the one people with this issue ?
Regards
0
0
Posted October 9th, 2024 12:22
You are loading the incorrect driver. There are 2 drivers being extracted, use the other one.
(edited)
0
0
Posted October 10th, 2024 22:40
Maybe Legacy boot with option ROM allows the storage controller be seen. In UEFI boot mode, drives that connected to RAID storage controller was not visible to Windows installer until the controller itself is visible and the drives that connected behind it. But that was not always the case, some installations being done in RAID mode without F6 drivers.
Chino de Oro
11 Legend
•
8554 Posts
•
47161 Points
0
0
Posted October 2nd, 2024 01:08
Download and extract this driver onto a USB drive. During Windows installation asking to load driver, browse to the USB and select VROC driver. That should allow NVMe drive be visible for selection.