UNSOLVED
Z
ZoomTheZone
6 Posts
0
5774
September 7th, 2006 23:00
Mising CTRL-M ON PE2550
any help pls or files to load
ZoomTheZone
6 Posts
192
0
Posted September 8th, 2006 02:00
Hi,try to put the controler to different slot and see if it works!countryman7346
9 Posts
192
0
Posted September 8th, 2006 12:00
Did the LSI-AMI Perc Controller just all of a sudden stop showing up during POPST? What model is this PERC? i.e. PERC 3/DC, PERC 2/SC? Some contollers are integrated to the motherboard while others are PCI cards. If this PowerEdge 2550 has an Adaptec Controller, then CTRL-A takes you into the configuration during post. I need a little more detail about the system in order to answer your question and help you find a solution.countryman7346
9 Posts
192
0
Posted September 8th, 2006 13:00
Go into the "f2" setup, make sure under integrated devices scsi is set to raid.
ZoomTheZone
6 Posts
192
0
Posted September 8th, 2006 02:00
I set the contorller to different slot restart the PC and
boomba CTR+M appered like never been disappered.
Thanks all for you help!