Solved!
Go to Solutioncant connect Dell force 4810 with cisco 3127 over sfp+
i tried to connect the two but there is no link
dell side:
dell branded ftlx8571d3bcl 13-06 850nm LN#50 6/2007
Non-qualified pluggable media present, SFP+ type is 10GBASE-SR
Medium rate is unknown, Wavelength is 850nm
cisco have:
transceiver is present
type is 10Gbase-SR
name is CISCO-FINISAR
part number is FTLX8571D3BCL-C2
revision is A
serial number is FNS1534256L
nominal bitrate is 10300 MBit/sec
Link length supported for 50/125um OM2 fiber is 82 m
Link length supported for 62.5/125um fiber is 26 m
Link length supported for 50/125um OM3 fiber is 300 m
cisco id is 3
cisco extended id number is 4
cisco part number is 10-2415-03
cisco product id is SFP-10G-SR
cisco vendor id is V03
DELL-Josh Cr
Community Manager
•
9790 Posts
•
45217 Points
1651
0
Posted October 15th, 2019 10:00
Can you do you have any other transceivers to try? It seems like it might not be detecting it properly.
i have 2 pairs of each, ( and i tried all combinations same result)
and each path works with the same type, dell - dell (dell-mellanox card) and cisco -cisco
but cisco to dell does not work
i also tried PLANET MTB-SR 10GBASE-SR and no link dell-cisco
iliaK
16 Posts
1431
0
Posted November 12th, 2019 23:00
we found out it was a polarity issue, sapped the sides of the cable.
never thought this issue still exists