UNSOLVED

Josie112

updated

22 years ago

J

Josie112

7 Posts

0

8694

February 17th, 2005 17:00

How Do I Use My Firewire Cable?

I want to transfer movies from my digital camcorder and have purchased a firewire (4 pin to 4 pin as recommended) to connect my camcorder to my Dimension 8400. The problem is that I can't find anywhere on my PC to connect the firewire to. I have spare USB ports but nothing that will take the firewire?
 
Thanks in advance.
  • MenFerret

    30 Posts

    275

    0

    Posted February 17th, 2005 19:00

    You'll need to get a firewire PCI card such as these....

    http://www.compusa.com/products/products.asp?N=0&Ntt=firewire%20cards&Ntk=All&Nty=1&D=firewire%20cards&Dx=mode%20matchall

    They're cheap and easy to install.

    ~Ferret~

  • Ron B

    639 Posts

    275

    0

    Posted February 17th, 2005 21:00

    Hello-There is lots of helpful information about firewire and digital video HERE
  • Josie112

    7 Posts

    275

    0

    Posted February 18th, 2005 16:00

    That's great, thanks for your help.
  • kjharris

    428 Posts

    275

    0

    Posted February 18th, 2005 20:00

    If your Dell came with a SoundBlasterAudigy card, that card has a firewire port built in. If not,when you buy the firewire card, check the ports on it to see whether your cable will work--there are 4 pin and 6 pin firewire ports and the cables can be 4 pin to 6 pin, 4 to 4, etc. I'm not using this but I think the most common is a 4/6--4 pin end to the camera and 6 pin to the computer firewire port.

    Ken