UNSOLVED
Cipher strenth appears as 0-bit in Internet explor
I found a knowledge base doc from mircosoft (Q261328). I followed the instructions for Millenniem Ed and was able to get to the re-registering part of these three dll files that are supposedly lost/damaged/etc. . When I tried to re-register them in the "run" portion I keep getting this error code "GetLastError 0x00000485" from LoadLibrary. I get this on all three files and I cannot find an answer thru Dell techs (phone), microsoft, or anywhere else I could think to look.
Steve Anderson
677 Posts
275
0
Posted September 7th, 2001 17:00
Hi,
When you do a find file on these three files check to make sure that all three are in the C:\Windows\System folder. You might have other copies showing but one needs to be in the correct location. When this is confirmed then to reregister them you would Start > Run > type in
regsvr32 C:Windows\System\schannel.dll > OK.
do this for each driver.
According to Microsoft you then should return to 128 bit cypher strength.
Steve
Steve Anderson
677 Posts
275
0
Posted September 7th, 2001 04:00
The error message that you are getting is the one that indicates that the files that you are registering can not be found. If you were to do a find file on the three files in question they probably are not in the C:\Windows\System folder.
You could run IE Repair tool to see if they can be replaced. IE Repair Tool is located in Accessories\System Information\Tools on the Program tree.
Steve