I have a e7440 with same issue, I powered up laptop with cmos battery unplugged, then while laptop was powered on and working I plugged the cmos battery back in the motherboard, after plugging battery back in turn power off manually and then back on, this solution worked for me, just wear surgical gloves or something that will not produce static electricity because you have power coming into the laptop so caution is encouraged,
KBSLAT
1 Rookie
•
4 Posts
4212
0
Posted September 26th, 2019 08:00
You mean its engineering defect? I test now maybe some other component fault this is. The board is fully tested and it was working!