UNSOLVED
Need help with SC280 High Density Tray
Group,
I am looking at purchasing a high density array. The sales rep and dell support is having a hard time providing a picture of the device inside a rack for me. i'm concerned about the length it says it might stick out the back side where my PDUs are. If someone has an SC280 tray can you post a picture of the back of the tray? Also an estimate of how far it extends would be awesome.
DELL-Kenny K
1 Rookie
•
685 Posts
755
1
Posted January 16th, 2014 10:00
I am still looking into finding a picture for you but I did some research and was able to ensure that unit will not stick out the back of the rack. These units are really set up pretty slick. I am sure you will really like it.
DELL-Kenny K
1 Rookie
•
685 Posts
755
1
Posted January 16th, 2014 12:00
The dimensions for the SC280 are as follows.
Height: 22.230 cm (8.8 inches)
Width: 48.260 cm (19 inches)
Depth: 91.44 cm (36 inches)
When it comes to the Racks here is a link for our racks that these will fit in completely.
I hope this helps answers your questions.
Here is the preinstallation checklist for a SC280 - I think it addresses your concern.
jbla9028
2 Posts
755
0
Posted January 16th, 2014 10:00
Kenny, I was able to obtain an image but still trying to confirm the length from front post to rear post. We have 29" deep racks. The images I received look to confirm what I suspect from the checklist we are required to sign off that the tray extends almost 7 inches past my rack's rear post.