UNSOLVED

LesyLuv12

updated

21 years ago

L

LesyLuv12

4 Posts

0

4425

August 27th, 2005 02:00

Dell 9100 - BLUE SCREEN OF DEATH!!

I just got this, I am using my laptop to type what I see on the 9100: WHAT DO I DO :womansad:
 
++++Blue Screen:
 
A problem has been detected and windows has been shut down to prevent damage to your computer.
 
PAGE_FAULT_IN_NONPAGED_AREA
 
Then down close to the bottom it says:
 
Technical information:
 
*** STOP: 0x00000050 (OxE6F1052C, 0x00000000, 0x8052c8D0, 0x00000001)
 
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
  • shaxl

    104 Posts

    206

    0

    Posted August 27th, 2005 03:00

    that doesnt really mean much if it happens just once. my dell is a year old and ive seen the blue screen twice just randomly at startup. just restart and it should be perfectly fine. if it consistantly comes up then u need to contact dell, and they'll replace the computer
  • Niche25

    64 Posts

    206

    0

    Posted August 27th, 2005 04:00

    LesyLuv12,

        Right Click on My Computer, click the Advanced tab, where it says Startup and Recovery: click settings. At the bottom underneath Write debugging information it should say Small Memory Dump (64kb) in the dropdown box. If so click the box and choose (none). Afterwards click OK and OK again. Restart your Dell and everything should be fine.    -Niche25 OUT.

  • eqmaven

    70 Posts

    206

    0

    Posted August 29th, 2005 21:00

    I suddenly started getting this message on my 9100. This was accompanied by various program errors and lockups. The message indicates a memory error. It may be a sporadic issue and of little concern. But it turns out that on my system a memory module had failed. (I was able to test system memory by downloading memtest86 from the web.) Dell is replacing the simm under warranty.

     

  • Cheetos

    5 Posts

    206

    0

    Posted September 1st, 2005 00:00

    Interesting -- after about 1.5 years I started having the same exact problem -- primarilly at boot time -- I thought it was a memory module and replaced both of them.  Still occured -- Recently I updated my NIC drivers to the US version (I have the 1300 MPCI Wireless adapter).  Anyway the past three boot ups have been fine --  I was wondering if it might have had to do with heat build-up or some sort of a failure (My power supply had failed and was replaced under warrenty, the replacement sometimes emits an electrical buzz (in short bursts) making me think I was getting unclean power)

    Anyway, maybe it was the NIC drivers? Dunno -- Does anyone from Dell have an answer to this (a known issue with ~1 year old Dell 9100s?)

    Thanks