UNSOLVED

Mesteralee

updated

5 years ago

M

Mesteralee

1 Message

0

3488

November 26th, 2016 23:00

Error (0x712D8514)

Hi every body

I have a problem

I have VNX 5400 and initialize in data center once.

A person who didn't  information about EMC just change SAS cable between DPE and enclosures.

Then I checked with unisphere console , i cant return SAS cable to original mode.

Now i changed the DPE and reinitialized storage.

I fetch the old DPE only and now i cant delete storage pool or cant reset to factory default.

My storage pool did offline and not at all didn't online.

This is error on the storage pool :

An error occurred while accessing the Storage Pool.  Please resolve any hardware problems and retry the operation. (0x712D8514)

please show me how to reset to factory default.

Thanks

  • AlanZ1

    2 Intern

    •

    790 Posts

    1909

    0

    Posted December 6th, 2016 08:00

    Your question has been moved to the VNX community

  • Rod Olmedo

    1 Message

    1125

    0

    Posted October 4th, 2021 14:00

    have this problem any solution?

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    1123

    0

    Posted October 4th, 2021 15:00

    Hi Rod,

    Which device are you using? Running out of free space can cause this. You may also want to try restarting the management service or rebooting the SP. Let us know if you have any additional questions. It may also be something that you will need to call phone support to resolve. 

  • ASJSP

    6 Posts

    1003

    0

    Posted November 30th, 2021 03:00

    Hi mesteralee

    you should connect via Console port from the back of your device to reinitialized.

    VNX1

    speed | 9600 

    data bits| 8 

     Stop bits| 1 

     parity | none 

    flow control | none

    ASJSP