UNSOLVED
Cellera legacy domain to VNX domain
Hi there,
We would like to put an old Cellera into a legacy domain then attached that to a VNX domain. Does anyone know where I can find documentatio on how to do this or could give me some key points?
Thanks,
Ed
umichklewis
4 Apprentice
•
1190 Posts
255
0
Posted February 22nd, 2013 08:00
The white paper you're looking for is called "Domain Management with EMC Unisphere for VNX". It details the specifics around what you need - a multi-domain setup which would allow your VNX and Celerra to be in the same UI interface.
Essentially the steps are:
1) login to the VNX domain as administrator
2) establish a multi-domain cnonection from the VNX to the Celerra
3) create user accounts in both domains with the same credentials
Note that VNX gateways make things a little more interesting and you have to jump through a few hoops with the right versions of Unisphere required.
Let us know if that helps!
Rainer_EMC
6 Operator
•
8645 Posts
255
0
Posted February 22nd, 2013 08:00
And dont call it Cellera or it wont work till you trade one l or an r ☺