UNSOLVED

yorkhoh

updated

11 years ago

Y

yorkhoh

6 Posts

1

421196

August 9th, 2015 03:00

Dell Venue 8 Pro Windows 10 Reset - INACCESSIBLE_BOOT_DEVICE

Keep getting INACCESSIBLE_BOOT_DEVICE error when trying to perform Windows 10 Reset (keeping existing files).

How do I resolve this?

Already tried deactivating drive encryption and disabling secure boot. Not sure what else to try.

Reason for Reset:

Observed the same inability to consistently snap apps to the side in tablet mode with my HP Envy X2 on Windows 10. Then after resetting Win10 on the Envy X2 the snapping works properly. I'm guessing there may be other little problems that reset may resolve.

  • The_Moves

    1 Message

    3393

    0

    Posted August 14th, 2015 03:00

    I have run i to the same issue on my Dell Venue 8 Pro. I just remember a popup about Trusted platform which i said yes, then it rebooted and all broke from there.

    I did just update to the latest firmare/bios, hopefully that isnt the cause.

  • npoenn

    7 Posts

    3407

    0

    Posted August 16th, 2015 19:00

    I have the same issue, I did a reset to clear the accounts from the device and now its stuck in a boot loop. I was able to get it to boot from a windows 10 recovery USB, but it doesn't seem to load mouse, keyboard, or touchscreen drivers so I have no way to actually perform the recovery actions.

    I've tried toggling secure boot and other BIOS settings, but no dice.

  • npoenn

    7 Posts

    3407

    0

    Posted August 16th, 2015 19:00

    Also, keyboard, mouse, and touchscreen all work in the BIOS menu so it isn't a problem with the devices or USB port.

  • PaulBar

    1 Message

    3407

    0

    Posted August 17th, 2015 02:00

    Exactly the same issue.  I am assuming that it is to do with clearing the TPM in that in can no longer see the bitlocker encrypted drive.  The message wasn't clear when it popped up and in my case, I hit the Vol Up key in error when I went to pick up the tablet to look at the message in more detail. 

    We need a solution Dell Support

  • genglish1

    2 Posts

    3407

    1

    Posted August 21st, 2015 11:00

    Well, add another one to the list.  I was getting ready to sell my Venue 8 Pro which I had upgraded to Windows 10 a few weeks ago.  I fired it up this morning to demo it to a potential buyer, and it worked flawlessly.  So I told him I would run it through the Reset routine to wipe all my data and accounts, and I'd get back with him in an hour or so.  It seemed to get most of the way through the Reset, but now is stuck in the infinite boot loop with the INACCESSIBLE_BOOT_DEVICE error.

    For what it's worth, a few days ago I did the same thing with an ASUS Transformer Book T100 with no problems -- Reset completed fine and I was able to sell that unit.  But not this one -- I had to tell the buyer I didn't have time to fix it and he's a co-op at our company with his last day being today :-(

    So I guess I'll try to download the Win10 installation to a flash drive and see if I can make any progress this weekend recovering from this issue.

  • jim2727

    1 Message

    3407

    0

    Posted August 26th, 2015 14:00

    Add this one as well.

    I am very disappointed with my dell venue pro 8.

    I was waiting a long time for windows 10 to arrive so I could finally use it.

    I never used it, it never worked properly.

    It was a constant battle to get any meaningful use out of it from day one.

    Now I also have INACCESSIBLE_BOOT_DEVICE failure after Windows 10 upgrade.

    COME ON DELL ,were fighting for your corner, we want it to work.

    I am currently in the same position as hundreds of disappointed customers, going round in circles getting no answers.

    Please let us continue to be dell customers, and post a solution.

  • toneboi

    1 Message

    3407

    1

    Posted September 2nd, 2015 03:00

    I recently purchased a Dell Venue 8 Pro 3845 second hand, the seller did a reset before he went to ship it and ended up with the same error. " INACCESSIBLE_BOOT_DEVICE"

    He sent me recovery media but it wouldn't boot from that. He also sent me a micro usb hub/adaptor.

    it took me about 8 hours but I managed to fix it, I don't know if it will help you guys but ill post it here anyway.

    If you haven't already activated Windows 10 and been signed into a Windows Live account on your tablet you wont be able to activated Window again. Un-activated copies of Windows 10 wont let you personalize your settings and will display a watermark logo saying your copy isn't activated but will otherwise be fully functional.

    If you have signed into a Live account and activated Windows 10 it will sync and activate your Windows 10 ( this was my experience installing an SSD into my Laptop where the system image failed )

    You need:

    A Micro USB Hub ( Powered )

    Keyboard/Mouse

    Windows 10 Installation Media (USB) MUST BE 32BIT! or tablet wont recognized it!

    Step 1: With the Tablet powered off press and hold the power button, then the Windows button.

    - The Dell Logo will appear

    Step 2: Release the power button first, followed by the Windows button.

    Step 3: Press Volume Up for Boot Options & select the Windows 10 Installaion Media

    Step 4: Install Windows 10, Skip entering your Product Key unless you know it.

    Step 5: Once completed, Windows 10 would load however the touch screen didn't work, I fixed this by going to the dell website and installing the Intel Atom Z3000 CPU drivers for my tablet.

    I don't if this will help you guys but i hope it does, i was so frustrated trying to get this to work and in the end i'm glad i did. The Dell Venue 8 i such a nifty little tab and Windows 10 offers an amazing experience. 

  • harmonpa

    1 Message

    3407

    0

    Posted September 30th, 2015 19:00

    Hi Toneboi I was wondering what kind of powered micro usb hub I am using one that lights up a mouse but won't light up a keyboard.  The mouse still doesn't allow for any selection of anything.

  • npoenn

    7 Posts

    3407

    0

    Posted October 1st, 2015 12:00

    I managed to fix my tablet using a recovery USB created from a colleague's tablet (same model). Using that recovery USB I had no issues with input, touch screen worked in the recovery wizard.

  • khduryea

    1 Message

    520

    0

    Posted October 26th, 2015 13:00

    Can you please tell me if you got the Win 10 installation to work?  I went through the process to create a recovery drive when i updated to Win 10, but there doesn't appear to be any image  on the micro SD card, so i can't reset.  Any help would be greatly appreciated.  thanks