I have a XPS Gen2 and want to install a 3rd Sata HD, the kind installed in its own front bay, so I can take it out at will. I have the serial ATA PCI card to connect it to, but I have two questions. First, where do I plug the little LED signal connector to. I see several places to possibly plug it in on the mother board, but not sure. Second, I want to put another windows XP pro on this HD, will windows automatically have me choose like in a dual boot system or what when this drive is plugged in? Thanks all for assistance.
I believe the LED signal is part of the ATA cable, so you don't need to use the connector. Also, check your Dell owners manual on RAID configuations. It talks about the limitations of using a 3rd HDD.
I cannot find anything saying I cannot install 3rd HD. I would have RAID off so that should not be a problem, I think. I guess I need to know is there a better way to connect the third HD besides what I plan through the PCI card and will there be any other problems that I should anticipate? I have only two Sata connections on the motherboard.
Thanks
Flygirl
Message Edited by flygirl77 on 02-20-2006 03:12 PM
I already have an external HD. You see a friend of mine has a beta of Vista and I would like to run it but not disregarding my primary system. That is why the set up that way.
Since you're not currently using RAID now, adding a third drive is no problem. I know on the XPS Gen 3 using the Intel RAID controller you can only configure paired drives 2, 4, etc. for RAID. You can add a third drive, but only in a RAID 1 configuration AND the third drive will NOT be recognized by the OS, but you will be able to see the spare drive from within Disk Manager or the Intel Option ROM utility.
Since you want the third drive to be somewhat portable, why not use an external USB hard drive such as Maxtor one touch? Since it's USB, you will have no problems down the line if you decide to upgrade to RAID.
Does the OS see the third drive? Are you using the Intel RAID controller? Maybe Dell made a change on the XPS400. The Gen 3 manual specifically says the OS will NOT see a third drive - page 24 "Creating a spare hard drive".
Yes and yes. The 3rd drive had to be enabled in the bios in slot t, but XP saw it upon bootup. I did change the drive letter but that's all.
The boot array now shows 1 array, 2 RAID devices and a non-RAID device.
My warning is to NOT listen to Dell tech support tell you how to do this. I have learned over the last few days that the Del support people - even the XPS support team, are relatively clueless about RAID1.
Sparky1641
37 Posts
442
0
Posted February 20th, 2006 16:00