
UNSOLVED
Inspiron 9100 optical disc read error freezes computer
I have this problem from time to time when attempting to read a disc that is either dirty or scratched. It doesn't occur on every read error, although I would estimate it is on one out of every four. It always occurs after some playback stuttering, which again I am sure is caused by a dirty/scratched disc.
Anyway, the problem is that instead of just aborting like any bad I/O process should, the problem can cause my entire system to completely lock up (to the point that even the mouse and keyboard are frozen), and I have to hold down the power button to shut down the system.
I've now had two different drives with this computer. The first was the DVD-ROM/CD-RW combo drive that originally shipped with it (sorry, don't remember the model), and after that drive completely died, I replaced it with an NEC ND-6650A DVD+/-RW drive. Both exhibited the same behavior from time to time, and there aren't any firmware updates available for my drive, so I think we can pretty much rule out the drive or the firmware.
There is another problem which may or may not be related. VERY often, my drive fails to eject (while totally idle) when I press either the eject button on the drive itself or use the eject function in Windows Explorer/Media Player/etc. Strangely, I have found only one workaround to get the drive to open, and that is to use the eject feature in PowerDVD 6. Don't ask me why, but no other program can open the drive, but if I load up Power DVD, then click eject, it ejects fine. I don't know what they do differently than every other program on the market. Like I said, I'm not sure if this problem is related to the system lock up issue, but it was also something I observed with both optical drives I had in the system, and this problem occurs almost daily, so it might be a good place to begin debugging.
I suspect the issue may be either chipset and/or BIOS related, and for the record, I am using the latest BIOS Dell has released for this computer (A06, I think). I was just wondering if anyone knew why my eject button fails to operate so frequently and/or my optical drives fail to "die gracefully" on disc read errors.
Thanks for any and all help. Believe me, it is much appreciated.
Responses (0)
Solutions (0)
