Aloron,

Unfortunately, Windows 7 is not a supported Operating System for the PV745N. The only supported Operating Systems are Windows 2000 Pro or Server, Windows 2003, or Windows XP. Below is the link for the Admin guide for the PV745N.

Please let me know if you have any further questions.

Thanks for the advice Kenny .. that is a shame about Windoes 7 or anything newer ... the only trouble with your link though is it talks about a Resource CD and I dont have that .. it has been long since lost in this office ..

So just hope I find the right drivers to work with the Server 2003 edition we have ..

Well just tried every driver on the download page and everytime i get to the page where it looks for the hard drive there is nothing listed ..

So I hit " s " and have it point off to the usb floppy and every drive that is installs gives me the following message ..

" The Scsi adapter, cd-rom drive, or special disk controller you specified is not installed in your computer "

any thoughts anyone ??

thanks ..

When it says a resource CD it is referring to the OS image from Microsoft. With these systems they come with a special image that includes the drivers so you will not need to load the 3rd party drivers. You just need to make sure it is the image that was originally sent for the system.

pop the lid off the 745 and see what disk contoller is fitted. If it's hardware raid you'll see a pci plug in card at the rear with long sata cables going front to back. If it was software raid you'll see a small intel daughterboard near the front left of the motherboard with sata cable going to that. Get back to us with the findings.

Thanks Kenny for the information but as I have stated before I no discs or docs from when this server was bought it was found among a pile of servers not being used and boss told me to get it up and running and use it for something ..

As for the card , it doesnt have the big pci raid controller card just the little one with the 4 gray sata cables coming into it ..

That is an intel serial ata contoller but the manuals do explain any further. You could try these drivers packed by symantec foruse with other stuff. www.symantec.com/.../sata-drivers-intel-ich9-and-ich10

Thanks Tommo666 for the link i tried both 9 and 10 .. 32b drivers and same thing .. no hard drives found and got the same error ....

i am starting to wounder if its worth at this rate ..

You could try win7 if you have a copy availbable. This has all sorts of drivers built in. If it did work you could interegate the sata controller for it's id, pci and ven number. Then google that and get the model etc.

Well that didnt work either ... tried windows 7 pro with all the drivers off the dell site and that site that tommo666 linked and still cant see the hard drives ..

the bios see's them fine .. i just dont get it .. never had this much troubel in my life with computers ..