
UNSOLVED
Migrating to SAN powerpath boot device on AIX 5.3 - HOWTO?
Hello all,
I am trying to migrate the rootvg from a locally attached scsi disk to a powerpathed SAN device on AIX 5.3. Do you guys have any suggestions what to do in which order?
The point of departure:
hdisk0 (local scsi disk) - rootvg
hdisk3 (san disk on 1st path)
hdisk4 (san disk on 2nd path)
hdiskpower0 (hdisk3 + hdisk4)
What I did so far was this:
extendvg rootvg hdiskpower0
migratepv hdisk0 hdiskpower0
reducevg rootvg hdisk0
chpv -c hdisk0
bootlist -m normal hdisk3 hdisk4
pprootdev fix
The "pprootdev fix" command returns an error:
0301-154 bosboot: missing proto file: /usr/lib/boot/network/chrp.hdiskpower.proto
pprootdev: PowerPath boot is not currently enabled.
So, did I do something wrong or did I miss something?
I am trying to migrate the rootvg from a locally attached scsi disk to a powerpathed SAN device on AIX 5.3. Do you guys have any suggestions what to do in which order?
The point of departure:
hdisk0 (local scsi disk) - rootvg
hdisk3 (san disk on 1st path)
hdisk4 (san disk on 2nd path)
hdiskpower0 (hdisk3 + hdisk4)
What I did so far was this:
extendvg rootvg hdiskpower0
migratepv hdisk0 hdiskpower0
reducevg rootvg hdisk0
chpv -c hdisk0
bootlist -m normal hdisk3 hdisk4
pprootdev fix
The "pprootdev fix" command returns an error:
0301-154 bosboot: missing proto file: /usr/lib/boot/network/chrp.hdiskpower.proto
pprootdev: PowerPath boot is not currently enabled.
So, did I do something wrong or did I miss something?
Responses (3)
Solutions (0)

dynamox
11 Legend
•
20419 Posts
•
87439 Points
921
1
Posted October 27th, 2008 05:00
welcome to EMC forums. Please download Host Connectivity guide for AIX and take a look at pages 50-88.
you can find the guide here:
Home > Support > Technical Documentation and Advisories > Host Connectivity/HBAs > Installation/Configuration
Message was edited by:
dynamox