That depends on the type of PERC Raid controller.  Its named "Online Capacity Expansion" within the manual.

https://dl.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprtl_adapters/poweredge-rc-h310_user%27s%20guide_en-us.pdf

https://www.dell.com/support/contents/en-is/videos/videoplayer/how-to-perform-online-capacity-expansion-for-dell-perc/6079770575001

Regards,

Joerg

Hi,

 

Yeah, OMSA is retired, but I think you can still install it to do some configurations. Perhaps, you can follow what Joerg mentioned first. iDRAC7 does not have the capability to configure RAID, you are not wrong. Yes, you will need to know what PERC are you using, if you are using PERC S110, it does not support expansion. 

It's the H310 PERC.  I found the post helpful but couldn't find such a menu option in IRADC7 or in the F2 menu.

Lawrie B

@LawrieBoarer​ or the Ctrl/R menu

Lawrie B

The manual says clearly that H310 supports ORE.   So install latest OMSA for your OS/Host and select the "Reconfigure" Task within the VD and select your Disks.  Sometimes you need to scroll to the right to see the Dropdown within the GUI.

OMSA is depricated for latest Hosts but your Hardware is around 12 years old and your OS is 10.

Regards,

Joerg

@Origin3k​ This is where I came in.  In the driver and downloads for a t420 I see loads of OMSA bits and bobs but no obvious distribution install link.

lawrie B

Question is what was the last supportet version on your 12Gen Host.

If i use the dell.com/support and enter T420 i got for Windows 2016

https://www.dell.com/support/home/de-de/drivers/driversdetails?driverid=wfy7v&oscode=wst14&productcode=poweredge-t420

The search term is "adminis" and the it will suggest the right Product name.

Regards,

Joerg

Hi,

 

Based on the user guide of OMSA 9.3, H310 https://www.dell.com/support/manuals/en-in/openmanage-software-v9.3/om_9.3_support_matrix/perc-h310-adapter-mini-blade-and-mini-monolithic?guid=guid-babeae3b-3348-4862-96d7-9e41c4802fdd&lang=en-us and Windows 2016 https://www.dell.com/support/manuals/en-in/openmanage-software-v9.3/om_9.3_support_matrix/supported-openmanage-systems-management-software-on-windows-operating-systems?guid=guid-cdae7b79-bc4b-418d-b1b7-546b51bc3cfa&lang=en-us is supported. 

 

You can give OMSA 9.3 an installation try: https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=ypy24

 

Before that, make sure that you're on latest firmware for the server's hardware. OMSA has some requirement for firmware versions. 

@Origin3k​ Thank you.  Will let you know the outcome.

Lawrie B

@DELL-Joey C​ Thank you.  I will let you know the outcome and make sure the firmware is up-to-date.  What about hard drives? does the firmware of the new drive need to be the same as the others in the raid?

Lawrie B