UNSOLVED

bandanaman

updated

23 years ago

B

bandanaman

12 Posts

0

9752

December 30th, 2003 20:00

true mobile 2300 and usb modem

i want to connect 3 comps running xp to my broardband usb modem  .i got a tm 2300 from dell is there any way i can set up a home network and share the one connection as the modem will not connect to the tm2300

thanks for any help

 

  • volcano11

    2 Intern

    •

    27973 Posts

    315

    0

    Posted December 30th, 2003 22:00

    Although they exist (particularly in Europe), routers that connect to USB cable/dsl modems are hard to find and usually expensive.  This is a basic limitation of cable/dsl modems that only support USB.  You should consider getting a new modem that supports ethernet.

    Steve

  • bandanaman

    12 Posts

    315

    0

    Posted December 30th, 2003 22:00

    thats my next step. but for the moment im using the tm2300 so all 3 comps connect to the internet. but all the comps will not comunicate each other .

     

  • volcano11

    2 Intern

    •

    27973 Posts

    315

    0

    Posted December 30th, 2003 23:00

    I don't understand your message.  If you can't connect the router to the broadband modem, how are all three computers connecting to the internet?  If you are just trying to set up a peer to peer network so all computers can share files and printers, then I suggest you go to the following site and use their tutorial on setting up a network:

    http://www.homenethelp.com

    Steve

  • bandanaman

    12 Posts

    315

    0

    Posted December 31st, 2003 09:00

    at the moment i have the tm2300 connected to the comp that has the usb modem connected to it . i have the other 2 comps connected to the tm2300 . all 3 comps are connected to the lan ports on the router. so the main comp has to be connected to the internet before the other 2 can go on line
  • volcano11

    2 Intern

    •

    27973 Posts

    315

    0

    Posted December 31st, 2003 14:00

    It sounds like you must be using Internet Connection Sharing on the computer that is connecting to the broadband modem.  Is that correct?  Can you sucessfully ping the IP addresses of the other computers on the network?  If any of the comptuters are running Windows XP, is the XP firelwall disabled on the local area connections?  Did you try the tutorial at the homenethelp web site I mentioned in my previous post?

    Steve

  • bandanaman

    12 Posts

    315

    0

    Posted December 31st, 2003 15:00

    i looked on the homenethelp site but theres nothing on there to help with this senario.all the pcs are running xp. the xp fire wall is disabled on all the pcs. i cant ping any of the pcs from any of the pcs if you see what i mean. i can only ping the tm2300's ip addy but i can do this from any of the pcs. i am using internet connetion sharing on the main comp

    according to dell support i should be able to use the tm2300 as an access point for wired and wireless networking but setting it up this way it has only let me share the internet connecting not files and printers

    thanks for your help steve

  • volcano11

    2 Intern

    •

    27973 Posts

    315

    0

    Posted December 31st, 2003 16:00

    Since all computers can get on the internet, all must have valid IP addresses on the network.  Have you set the router for access point mode so that it doesn't attempt to assign IP address to the other computers (internet connection sharing running on the directly connected computer should be assigning the IP addresses).  Are you sure you are using the correct IP addresses to ping the other computers? (to find the IP address of each computer, go to a command prompt and run ipconfig /all ). 

    Steve

  • MrSnivvel

    18 Posts

    315

    0

    Posted January 1st, 2004 20:00

    When you set the TM2300 into AP mode, the DHCP server functions are not automatically turned off. Here are the steps to use when setting the TM2300 into AP mode. First, select the option to use Acess Point Mode, then select next to save the setting, do not do the Save & Restart just yet. Go to the Advanced Settings, then Advanced IP Settings, change the IP address shown to that which will match the range that ICS will give, i.e. 192.168.0.200, then hit the Submit button. After the router, now AP, restarts, log back in the TM2300 using the IP address that you just assigned. Go back into the Advanced Settings, then DHCP Server Settings and uncheck the box for Enable DHCP Server Functions, and the click on Submit again. Disconnect power to the TM2300, put all the cable back to the LAN ports, the Internet Port at this point is disabled, then repower the TM2300. Now all the systems on your network should be getting an IP address from the main system connected to the cable modem.

    All the systems should be able to ping each other, if not, there is a software firewall installed on the non-pingable system. From here on out, the regular Workgroups and Permission steps apply.
  • bandanaman

    12 Posts

    315

    0

    Posted January 1st, 2004 22:00

    thanks for all the help i have recieved regarding this problem. i gather from reading messages on the forum that it is quite a common problem with a poor product . ithink im one of the lucky ones as ive sorted it out with the help ive been given .once again thanks

    shaun