UNSOLVED
Networker 9.1 and SNMP
Hi guys,
I configured an SNMP notification checking every field:
Is it normal that if a backup fails no traps are sent?
I scheduled a bad configured policy, it failed, no trap sent.
Is this a normal behaviour?
Other kinds of traps are sent (when a pool is written, for example).
Tjanks
1362
0
Posted June 20th, 2017 03:00
Have you tried to configure it directly via policy or workflow?
1361
0
Posted July 5th, 2017 01:00
There are hardware failure logs for alert notifications in NMC but nothing related to backup failures
I am personally looking into working to tweak the mongodb of BRM and get this job done - some scripting is required of course.
1359
0
Posted July 20th, 2017 12:00
EMC TechSupport notified that the option to report on Backup Failure via SNMP is not included... Hence we raised a Request for Enhancement to Engineering.. There is no ETA for the fix at this moment .. we are using DPA SNMP Traps to capture these now
Raj-Jalli
8 Posts
1360
0
Posted June 13th, 2017 12:00
I had the same issue , a case has been opened and support is looking at it