
UNSOLVED
Optiarc firmware update Vostro 1310 BEFORE win 7 install?
Hello to all. I'm about to install Win 7 Pro 64 bit on my Vostro 1310 and was wondering if I need to do a firmware update on the DVD RW drive before I do the install? I have all the other appropriate hardware drivers assembled, this is the only thing I'm unsure of. Thanks in advance for any and all help and best regards, Morey G. Multiple Dell systems - happy with all of 'em!
Responses (3)
Solutions (0)
Rohan,
Thanks much for the prompt reply and advice. Firmware updates scare me sometimes.
I downloaded x64 Win 7 drivers for network, WLAN , and nvida graphics driver . There are a few people who have gone win 7 pro 64 and it appears they've had success. My 1310 is running vista business 32 SP 2(?). I want to wipe the drive clean and do a fresh win7 pro64 . What would you suggest ?
Thanks again for the help, the welcome and your continued assistance .
Regards,
Morey
DELL-Roshan L
6 Operator
•
4433 Posts
281
0
Posted November 12th, 2012 20:00
Hi Morey,
Sorry for delay in response,was out of office due to weekly off.
I would suggest you to give it a try and see how it goes.If there is a problem/issue which cannot be addressed after installing Windows 7 you can always reinstall your original operating system( Windows Vista).

DELL-Roshan L
6 Operator
•
4433 Posts
281
0
Posted November 10th, 2012 06:00
Hi Morey G,
Welcome to the Community,
To install Windows 7 you need not update the OPTIARC firmware for the optical drive.Even on the support website its level of importance shows optional.I believe you're aware that Dell does not provide Windows 7 compatible drivers for this system model.For this system model only Windows XP and Vista 32 bit drivers are available on www.support.dell.com.
Ideally most of the drivers should automatically get installed with Windows 7.