UNSOLVED

FrancoisH

updated

18 years ago

Closed

F

FrancoisH

15 Posts

0

23444

September 25th, 2008 16:00

[M1730] nVidia cards and Ageia PhysX !

Hello there,

 

Here are my problems :

  • When I start-up my PC on Battery, with any 17x.xx drivers from nVidia or Dell, Windows Vista start, then I hear the welcome screen music, the login "ta da" and I still get a black screen...
  • If I do the same with the power cable connected, Windows start normally and I get display working.
  • When I do the "Diagnostic" or I play to a game that use Ageia PhysX integrated chipset, I get the video card fans running at full speed, which do not seems to be a normal thing.

All those points made me phone the technical support a month ago... My computer was taken to the support center then "repaired". They changed (officially) the motherboard and the graphic card. I got back my computer today, a month after the departure, when I was supposed to get it back after a week. This delay was due to on of the part being unavailable and they was waiting for the resupply.

 

Now, I tried back on this "fully tested" PC these things and... I got exact same issue... note that the computer was formatted and reinstalled (not completly, I had to reinstall almost all drivers because support center does not).

 

Have you any idea if this problem is hardware or software (likely Vista) related... Maybe I'll try to install Window XP and see if I get same trouble ?

 

Regards.

  • stefanrp97

    538 Posts

    950

    0

    Posted September 25th, 2008 21:00

    It's your video drivers. Several other have posted the same problem before for the M1730. Go to laptopvideo2go.com and download the latest driver for your system. Just about guarranteed to fix the problem. :smileyhappy:
  • FrancoisH

    15 Posts

    950

    0

    Posted September 25th, 2008 23:00

    Still the issue with Ageia Drivers... any clue ?
  • TheRealFireblad

    4 Apprentice

    •

    4639 Posts

    950

    0

    Posted September 26th, 2008 04:00

    What sort of "issues" - because the Ageia drivers are combined with the Forceware drivers now? 
    Anyways... try installing these PhysX drivers, to see if they make any difference?
  • FrancoisH

    15 Posts

    950

    0

    Posted September 26th, 2008 12:00

    No, whatever the driver I chose, I get the same issue : Fans are going max speed...

     

    So either the chipset got very warm or there's some trouble there...

     

    Which is surprising is that the motherboard and the videocard are new...

     

    Regards.

  • bobwalt

    99 Posts

    950

    0

    Posted September 26th, 2008 18:00

    How can a reply to the thread be given an "accepted solution" status when it is obvious from the replies that it did not solve the problem?

     

    Bob

  • FrancoisH

    15 Posts

    950

    0

    Posted September 26th, 2008 18:00

    A mistake on my side and I have not found the way to remove the tag.

     

    This should be now solved :)

    Message Edited by FrancoisH on 09-26-2008 09:30 PM
  • bobwalt

    99 Posts

    950

    0

    Posted September 26th, 2008 18:00

    Sorry, I thought somehow someone else was able to flag it in error.  I do have a couple of suggestions for you problem.

     

    1.  Get the latest bios as it states that it has some sort of optimization for the PhysX card.

    2.  Uninstall both the NVIDIA video driver and the PhysX software

    3.  Install the latest PhysX software from NVIDIA and use the tool that comes with it to set the PhysX support to the the PhysX card

    4.  Install the latest NNIDIA Vista laptop driver from NVIDIA. (they have one available)

     

    Bob