
UNSOLVED
A
amazingblkm
2 Posts
0
10736
February 28th, 2008 12:00
Optiplex GX270
Hi everyone, i have a big problem and hope someone can steer me in the right direction.
Dell Optiplex GX 270 2.6 Ghz P4
1.5gb DDR Ram
Seagate 100Gb IDE Hdd Master
Seagate 250Gb IDE Hdd Slave
O.S. Windows XPSP2
I had to re-install the OS on my computer so i went to the download section of the site and downloaded the updated drivers and bios updates. I installed the bios first then started loading the OS. The system files loaded to 63% and froze. I changed the Hdd and tried again with the same result. I am on my third Hdd and still have the same problem, which leads me to think that the bios is the problem. I want to reflash the bios but thought i'd check in here for any thoughts on the problem.
Dell Optiplex GX 270 2.6 Ghz P4
1.5gb DDR Ram
Seagate 100Gb IDE Hdd Master
Seagate 250Gb IDE Hdd Slave
O.S. Windows XPSP2
I had to re-install the OS on my computer so i went to the download section of the site and downloaded the updated drivers and bios updates. I installed the bios first then started loading the OS. The system files loaded to 63% and froze. I changed the Hdd and tried again with the same result. I am on my third Hdd and still have the same problem, which leads me to think that the bios is the problem. I want to reflash the bios but thought i'd check in here for any thoughts on the problem.
Responses (6)
Solutions (0)
amazingblkm
2 Posts
152
0
Posted February 28th, 2008 13:00
I alreadt ran Seatools to make sure and the caps all look good, none swollen so far.Hydralisk00222
2 Intern
•
2440 Posts
152
0
Posted February 29th, 2008 21:00
@tr4 wrote:
A couple of thoughts. I'd drop the ram down to 512 and retry
As a convenience, you can set OS Install Mode in BIOS which will max the RAM at 256MB. If everything works with OS Install Mode on you have faulty RAMvictorvictor
5 Posts
152
0
Posted March 1st, 2008 04:00
Hi everybody,
I have an Optiplex GX270 and I want to get a video card that supports two monitors.
Its narrow chassis (12.5"x13.25"x3.75") will not accept the standard video cards.
I bought on-line (Zones) one that did not fit and I am sending it back (Jaton's Video-PX358LE-Twin). The box claims to "support low profile systems" but the gold pins and back side of chassis do not align.
How can I figure out the right size video card for my computer?
I also tried nVidia website and it is impossible to get beyond the generic questions.
Any suggestions will be greatly apprecited
Thank you,
Vic

ejn63
11 Legend
•
87469 Posts
•
321256 Points
152
0
Posted February 28th, 2008 12:00
Also open the case and check for bulging/leaking capacitors - can shaped devices around the CPU and video card. If you see any, the mainboard should be replaced.