davitofr

updated

3 years ago

D

davitofr

21 Posts

0

2250

September 9th, 2020 10:00

BSOD while installing PowerDVD

  • Hello

On my G7, each time I try to install PowerDVD 20, I get a BSOD with "ACPI BIOS ERROR". I can never reach the end of the installation. Any ideas?

 

  • davitofr

    21 Posts

    1566

    1

    Posted September 12th, 2020 09:00

    From the https://windowsreport.com/acpi_bios_error-windows-10/ list of "solutions":

    1. my drivers are quite up to date, according to SupportAsist as well as Windows
    2. removing my SSD is not an option since Windows is installed on my SSD
    3. I could not find any way to change ACPI settings in the BIOS, so this is out
    4. see 3
    5. don't even think of it
    6. maybe...
    7. I don't have a Windows installation problem, so hopefully 7 is not to be tried
    8. Those are removed. Actually, I removed all Alienware software from my G7 before using them, so that AFAIK, my machine is not overclocked
    9. I did not change anything in the BIOS apart some settings for the battery. Hmm. Battery ... ACPI Could this be the problem? I will now try to reset my BIOS and I'll see

    This did it: I reset to factory default and I could patch without any problem.

    Problem solved!

     

  • A51-06

    7 Practitioner

    •

    3094 Posts

    •

    13670 Points

    1218

    0

    Posted September 12th, 2020 11:00

    That’s great!
    mark your solution that’s says it was fixed and then your done!


    *NOTE: I am NOT a Dell employee, But I am a Community Rockstar*

    Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!

  • crimsom

    9 Technologist

    •

    6114 Posts

    1014

    0

    Posted September 9th, 2020 11:00


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • davitofr

    21 Posts

    1004

    1

    Posted September 9th, 2020 12:00

    Ah, sorry. Although never was the word "Inspiron" mentioned during my order. Some bot already asked me for my service tag. Should I start a new thread in Inspiron or is there some way to move this thread in Inspiron?

  • crimsom

    9 Technologist

    •

    6114 Posts

    1000

    0

    Posted September 9th, 2020 12:00

    Hi @davitofr  a moderator will move your thread for you, there is nothing for you to do, other than to keep contributing to this thread. This is Dell advertising fault by saying New Dell. 


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • A51-06

    7 Practitioner

    •

    3094 Posts

    •

    13670 Points

    990

    0

    Posted September 9th, 2020 14:00

    Update your bios to the latest version and then update the rest of your drivers.

    also do a clean boot and try installing again.


    *NOTE: I am NOT a Dell employee, But I am a Community Rockstar*

    Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!

  • bacillus1

    2 Intern

    •

    415 Posts

    989

    0

    Posted September 9th, 2020 14:00

    In addition to Alienware Area-51 ALX 2006 response, did you have a previous version of powerdvd installed?
  • davitofr

    21 Posts

    968

    0

    Posted September 10th, 2020 00:00

    @Alienware Area-51 ALX 2006 

    Hello and thanks for your answer.

    OK, full story: I first tried to install logged to Windows with my local account. BSOD.

    I thought BSOD is often a driver issue, so I switched to my administrator account and ran Dell Update. I am not quite sure but I believe Dell Update told me my system was up to date. I went to www.dell.com/support/home/(...) and asked what downloads were available for my Dell G7. I found 8 files and installed them. Some of them were actually already installed: bios (I saw the version which was about to be installed was the same which was already there), and some other drivers (I don't remember which, but I noticed that the installation only offered to repair instead of installing.) I can give you the list if you think it would be useful.

    Then I tried to install again, still logged as administrator. BSOD again.

    I did not know about clean boots. Discovering new things is (almost) worth the issues I am having Clean boot will be my next step now.

  • davitofr

    21 Posts

    963

    0

    Posted September 10th, 2020 00:00

    @bacillus1 

    Hello and thanks for your answer,

    The answer is yes. I first bought a license for PowerDVD 19 and installed it, but I never managed to use the software: I got the menus and even my files, but I could never see video content: no DVDs, no video files. I thought maybe the license was not quite legit, so I decided to buy PowerDVD 20 from the CyberLink web shop. While installing PowerDVD 20, the setup asked me to uninstall PowerDVD 19, which I obviously accepted, and further asked me if I wanted to remove previous user settings which I accepted too.

  • davitofr

    21 Posts

    955

    0

    Posted September 10th, 2020 01:00

    Further information:: BlueScreenView tells me the 3 BSOD happened in ntoskrnl.exe and were caused by ACPI.sys. I guess this only confirms what I already wrote in my first mail.