stevesalp

updated

5 years ago

S

stevesalp

6 Posts

0

1483

November 3rd, 2021 12:00

BIOS

just copied the system image and burnt recovery DVD on my Inspiron 3881 however if I should ever need to enter BIOS settings to alter the boot sequence I do not know how to get into BIOS on my PC and the online solutions offered do not work such as when pressing F2 or Del the the PC just continues to boot up normally. I May need this information if a normal boot fails at any time.

Any help would be much appreciated

  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    1185

    1

    Posted November 3rd, 2021 15:00

    As soon as you boot the system start tapping F2. The BIOS screen will display shortly after that and when it does you can stop tapping.

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • 1161

    0

    Posted November 5th, 2021 06:00

    As you turn on your computer  

    • Press F2 for BIOS options
    • F12 for boot menu 
  • 1159

    0

    Posted November 5th, 2021 06:00

    As soon the computer turns on immediately start tapping those keys .

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1147

    0

    Posted November 5th, 2021 12:00

    @stevesalp   Make sure you test that the DVD boots the PC before you need it.

  • stevesalp

    6 Posts

    1141

    0

    Posted November 6th, 2021 02:00

    Many thanks for the advice,

    Regards

  • stevesalp

    6 Posts

    1140

    0

    Posted November 6th, 2021 03:00

    Many thanks for your advice and could you please run through the process for checking the correct operation of the rescue disk . Does the disk need to be loaded prior to 'power on F2' or once the bios page is open and once in the Bios what is the process from then on.

    Regards

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1126

    1

    Posted November 6th, 2021 15:00

    You need to put the bootable DVD in the drive, close the drawer, and power PC completely off.

    Then power PC on and tap F12 to open the boot menu. Look for the option to boot from the optical drive on that menu. You don't want to change any boot options in BIOS setup.

  • stevesalp

    6 Posts

    1104

    0

    Posted November 7th, 2021 08:00

    Very many thanks for all your assistance