Hello annonyme1,

You will need to login to group manager to see how your system is configured.  Since you have a username and password you can use that to see how all your Equallogics are configured & if your hyper-v hosts are connected.

Please let us know if you have any other questions.

Hello, 

 Re:SSH  Yes you can access the CLI via SSH.   When you login run this command and reply with the results

 GrpName> show mem -poolinfo
Name Status Version Disks Capacity FreeSpace Connections Pool
---------- ------- ---------- ----- ---------- ---------- ----------- -------
PS6210E online V10.0.3 (R 24 33.74TB 32.73TB 142 default
469188) 

 GrpName>show volumes 

  Find the volumes you are interested in finding who is connected. 
  GrpName>volume select show connections 

  e.g if the volume name is 'exchange-vol1' 

 GrpName> volume select exchange-vol1 show connections
Initiator UpTime RxData TxData
--------------- ----------------- --------------- ---------------
192.x.x.x 100days 3hr 41mi 3.43GB 220.50GB  n 31secs
192.x.x.x 100days 3hr 41mi 499.84GB 840.14GB  n 11secs
192.x.x.x 100days 3hr 41mi 907.17MB 14.05GB n 1secs

  This will show you what servers you have connected to that volume. 

Now run:

GrpName:volume select show members

Grpname>volume select exchange-vol1 show members
Member Name Contribution (Reported Size) Pool
--------------- ---------------------------- ----------
PS6210E 2TB default

 But AGAIN, just shutting off a member in a group to save power is NOT a solution.   The configuration database is maintained on EVERY member.  So if that member is offline it won't get updated. 

 If there are not volumes on that member it if its in its own pool then you can DELETE it from the group.  That will reset it and later if you need it you can re-add it and reconfigure it. 

 Regards, 

Don