UNSOLVED

vimad

updated

17 years ago

V

vimad

2 Intern

•

152 Posts

0

2306

May 27th, 2010 12:00

Quorum Drive

We need to Migrate 7.5 TB from the CX700 to DMX 4. I am planning to use SAN Copy to copy the data from Source array to target array. Source servers are windows cluster i see 22 data devices given to them from CX 700 and 1 device whic is of size 0.5 GB (quorum drive) given from CX 700. So do i need to migrate  this 0.5 gb quorum drive with the remaining 22 data devices using SAN Copy to the target DMX . We have already build new servers on the target side. Please clarify regarding this.

Thanks,

  • AranH1

    2163 Posts

    1341

    1

    Posted May 27th, 2010 12:00

    It depends on if you are migrating the hosts. If you are migrating the cluster (the nodes as well as the configuration) then yes you will need to migrate the quorum as that contains the cluster configuration database. SANcopy is a good choice for this move and can be done incrementally with a large bulk copy with the hosts online, and then a final incremental synch with the hosts offline.

    If you are not migrating the hosts and will be building a new cluster using the data LUNs from the cluster, then just migrate the LUNs and mask them to the new hosts to build the new cluster.

  • AranH1

    2163 Posts

    1341

    1

    Posted June 3rd, 2010 07:00

    Yes, those steps apply to pretty much all the versions of FLARE going back quite far.

  • vimad

    2 Intern

    •

    152 Posts

    1341

    0

    Posted June 3rd, 2010 07:00

    Thanks for the response.

    So to do the online SAN Copy from Clariion to DMX can i follow the following steps

    1) Create the SAN Copy session using the incremental option

    2) Start the Copy session using the -copywholelun -nomark all option (Hosts Online)

    3) 100 % copy done

    4) Start the session again to copy the incremental changes (Hosts Online)

    5) Final Cutover run the SAN Copy session again (Hosts Offline).

    Is the steps good ?

  • vimad

    2 Intern

    •

    152 Posts

    1341

    0

    Posted June 3rd, 2010 07:00

    FLARE Version running on the Clariion is 2.24. With this Flare version i am good to follow the above steps right ?

  • 1341

    1

    Posted June 3rd, 2010 07:00

    Steps look good ..

  • RRR

    6 Operator

    •

    5739 Posts

    1341

    0

    Posted June 3rd, 2010 07:00

    You could leave out step 4, since step 5 is the same as step 4.

  • 1340

    0

    Posted June 3rd, 2010 11:00

    The latest version is CX700 FLARE Operating Environment (OE) Bundle 02.26.700.5.031 updated on March 16, 2010

    But Flare 24 should work fine too ....