mcjim

updated

19 years ago

M

mcjim

1 Rookie

•

33 Posts

0

1889

September 10th, 2007 13:00

Cisco IVR

Trying to configure tape devices in a vsan to see data movers.Do I need only the data movers to be in the IVR zone or do the fa's (I am getting disk from a DMX-3 )need to be there also?
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    708

    0

    Posted September 10th, 2007 16:00

    you will need to be able to zone your tape drives to the dedicated hba on your datamovers, so you only need tape drives and HBAs in the zone.
  • kchuemc

    19 Posts

    708

    0

    Posted September 10th, 2007 20:00

    Yes, the NAS basically has 3 types of "fibre" ports

    1) Backend ports -> they connect to the storage

    2) AUX ports -> they are for tape devices

    3) Ethernet fibre -> for optical ethernet, if your data mover has them.

    Do NOT zone the tape drives to the Backend ports! Only zone them to the Auxillary (AUX) ports!

    Kelvin
  • BillStein-Dell

    Moderator

    •

    285 Posts

    392

    0

    Posted September 11th, 2007 07:00

    Remember that when zoning, we recommend "single HBA zoning," so each individual zone should only contain one HBA. It can have multiple initiators (i.e. several tape drives), but only one HBA per zone.
  • mcjim

    1 Rookie

    •

    33 Posts

    707

    0

    Posted September 12th, 2007 11:00

    created the zone but cannot see the CDL.Ran following
    server_devconfig server_2 -l -s -n
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    707

    0

    Posted September 12th, 2007 12:00

    try this:

    server_devconfig ALL -c -s -a
  • mcjim

    1 Rookie

    •

    33 Posts

    707

    0

    Posted September 12th, 2007 12:00

    Ran that already.Still nothing.
  • kchuemc

    19 Posts

    707

    0

    Posted September 12th, 2007 14:00

    Please run a server_devconfig server_X -probe -scsi -all. This is what the data mover is seeing out of its fibre ports

    Do you see your tape library/tape drives listed anywhere? If not, the Celerra is not seeing them; you will need to fix the zoning.

    If you see them, run server_devconfig server_X -create -scsi -all, which will add them to the Data Mover.

    Kelvin
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    707

    0

    Posted September 12th, 2007 14:00

    is zoning ok ? can you also run server_devconfig server_2 -c -s -a . I have seen sometimes where using "ALL" option does not rescan correctly.
  • mcjim

    1 Rookie

    •

    33 Posts

    284

    0

    Posted September 13th, 2007 08:00

    yes
  • mcjim

    1 Rookie

    •

    33 Posts

    284

    0

    Posted September 13th, 2007 08:00

    Its active.Created the san client on the cdl and it shows the celerra port as the initiator.Tech1! says I need to reboot the data mover