UNSOLVED

TAINGO

updated

6 years ago

T

TAINGO

1 Rookie

•

11 Posts

0

7896

July 8th, 2020 03:00

m17 R3, 300Hz screen buyers remorse

Anyone else purchase the Alienware m17 R3 - 300Hz screen and regret it? The battery drains SO quickly (less than 2 hours) and games don't get over 140FPS. There really is no point buying it unless you're playing a low graphics game that hit that FPS. For those looking to purchase, go for the 144Hz or 4K screen.

 

  • A51-06

    7 Practitioner

    •

    3094 Posts

    •

    13670 Points

    7540

    0

    Posted July 8th, 2020 13:00

    If you wanted to,

    You could try getting the graphics amp so when the New 3000 series come out you have more than enough horsepower to push 300FPS or a bit lower.

    Make sure to plug it in and set the Power plan to High-preformance.

    Also if you want to save battery, adjust the Refresh rate of the display to 144Hz in the Display settings in windows 10 with the advanced display options.


    *NOTE: I am NOT a Dell employee, But I am a Community Rockstar*

    Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    7537

    0

    Posted July 8th, 2020 14:00

    @TAINGO  Another issue with the 300 Hz display seems to be that it doesn't support G-Sync.  That means running high refresh rates can become a bit of an issue, because your only options at that point are V-Sync Off or V-Sync On.  If you use V-Sync Off, then you can see frame tearing, which is precisely what V-Sync is meant to eliminate. But if you turn V-Sync On, then when using a 300 Hz display, you'll need to make sure your system can maintain a stable 300 fps -- which would be difficult even for a top-end desktop GPU -- because whenever the GPU's frame rate drops below the display's refresh rate, you'll see stuttering or judder because the GPU will repeat the previous frame to "buy more time" to render the next one, and stuttering/judder can be just as distracting and annoying as frame tearing. It also creates input lag.  This dilemma is precisely why G-Sync was created, since it eliminates frame tearing while also avoiding stuttering/judder and lag by allowing the display's refresh rate to change based on the frame rate the GPU can handle at any given time -- but again that doesn't seem to be available on the 300 Hz panel.

  • A51-06

    7 Practitioner

    •

    3094 Posts

    •

    13670 Points

    7508

    0

    Posted July 8th, 2020 19:00

    Well because it’s a Laptop display made by Alienware so they must have some reason why they didn’t make a G-Sync Panel.


    *NOTE: I am NOT a Dell employee, But I am a Community Rockstar*

    Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!

  • A51-06

    7 Practitioner

    •

    3094 Posts

    •

    13670 Points

    7479

    0

    Posted July 9th, 2020 07:00

    Oh why thank you for your knowledge.

    I just thought G sync only works to a refresh rate that it can handle because I thought that if it was too high it wouldn't work.


    *NOTE: I am NOT a Dell employee, But I am a Community Rockstar*

    Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    7482

    0

    Posted July 9th, 2020 07:00

    @Alienware Area-51 ALX 2006  Typically G-Sync panels aren’t available because it requires the NVIDIA GPU to directly drive the built-in display, which means lower battery life, but the m17 R3 does in fact have a G-Sync panel option.

  • PhatAdam

    1 Message

    6787

    0

    Posted September 9th, 2020 08:00

    right!! but on the g-sync laptop Optimus, basically renders your battery the same as the 300hz display - so unless you manually turn on Optimus, and reboot - your battery is the exact same on the 2070super 144hz gsync, as it is with the 2070s on the 300hz. I ordered both to test it returning my 144hz Gsync, and keeping the 300hz. I can manually turn down the gpu power on the 300hz option to squeeze the same battery life. did about 90 minutes of work on the chair last night with the 300hz, and maybe got 115minutes on the 144hz.. not enough of a difference. also basically all games are refined to not cause tearing gsync is basically nothing (these days.)

     

    don't buy the 4k - windows doesn't scale well.  apps that don't scale, show up unreadable (and you'd be surprised how many that is.)

  • A51-06

    7 Practitioner

    •

    3094 Posts

    •

    13670 Points

    6777

    0

    Posted September 9th, 2020 14:00

    Pffff,

    try connecting a laptop to an 8k tv and you'll see TRUE App scaling issues as most apps are made for 1080p and not really 4k. let alone 8k.


    *NOTE: I am NOT a Dell employee, But I am a Community Rockstar*

    Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!